新型明桥面轨枕板式无砟轨道结构参数研究

钢桁梁桥由于其承载性能好和跨越能力较强等优点,在大跨度铁路桥梁中被广泛采用。但大跨度钢桁梁桥具有跨中挠度大、梁端转角大和温度变形敏感等特点,为了减小大跨度钢桁梁桥二期恒载、适应桥梁变形特性,在大跨度钢桁梁桥上采用新型明桥面轨枕板式无砟轨道结构。以南沙港铁路某大跨度钢桁梁桥铺设新型明桥面轨枕板式轨道为背景,采用有限元法建立大跨度钢桁梁桥上轨枕板式无砟轨道结构计算模型,研究了轨枕板结构参数对轨道受力与变形的影响,确定轨道结构的合理尺寸与参数。结果表明:轨枕板的外形尺寸直接影响其受力和变形特征;板下垫层的厚度对垫层的受力特性的影响较大;建议南沙港铁路某大跨度钢桁梁桥上采用具有2组承轨台、宽度为2800 mm的轨枕板,轨枕板厚度为280 mm,板下垫层厚度为120 mm。     

基于MRF方法和滑移网格的螺旋桨水动力性能研究

本文基于计算流体力学(CFD)方法,对多重参考系模型(MRF)及滑移网格模型(SM)在计算螺旋桨水动力性能时的差异进行了探讨。将以上两种模型应用到4381螺旋桨的水动力性能计算中,首先将计算得到的推力系数及转矩系数与试验数据进行了对比,考察了两种计算模型对螺旋桨的敞水性能的预测情况,并进一步对两种模型计算得到的螺旋桨盘面的速度场、桨叶的压力分布、桨后涡量云图等进行了对比分析。计算结果表明,滑移网格模型相较于多重参考系模型,对螺旋桨的推力系数的模拟结果误差更小,扭矩系数方面,两种模型的模拟结果相差不大；对于进速系数较大时,两种模型模拟得到的压力分布及速度分布较为相似,但对于高负荷情况,滑移网格模型可以更好地捕捉桨叶的压力分布及桨盘面处的速度分布情况；进速系数较小时,多重参考系模型可以模拟出涡结构的发散现象,而滑移网格模型可以更好的在高进速系数情况下捕捉到梢涡结构。     

电力机车车轴热处理工艺的研究

分析了EA4T钢的性质特征以及传统调质处理工艺所存在的问题,系统地研究了正火、淬火及回火工艺对材料的组织及性能的影响规律。通过系统的实验,探索出了DJ4型机车车轴的最佳热处理工艺参数。     

地铁车辆不锈钢车体的强度分析

结合国内某地铁车辆不锈钢车体,在分析其结构特点和不锈钢材料的力学性能的基础上,建立了车体结构的有限元模型,并借鉴国内外的地铁车辆技术标准和实际运行状态确定了载荷工况,分析了车体结构在各个工况下产生的应力、变形和模态。结果表明该不锈钢车体的强度满足要求。     

港口设备钢丝绳断绳事故分析及预防

对钢丝绳断绳事故进行分析,提出了一些措施,诸如通过钢丝绳的选用、维护、保养、检测等,来延长钢丝绳的使用寿命,杜绝事故的发生。     

双相化处理工艺对冷拔双相钢丝组织和性能的影响

研究了08Mn2Si钢不同工艺处理后双相组织的形态及冷拔中组织与性能的变化,结果得到:950℃预淬火后再经临界区加热淬火时可以得到细小均匀的纤维状双相组枳,这种组织在冷拔中转变为很细的平行于拔丝方向的纤维状组织,且具有最好的强度和韧性。     

焊接钢结构现场施工质量与工艺控制

针对焊接钢结构现场施工过程中,以大运高速公路康庄服务区大型加油广场的钢结构施工为实例采取的一些新技术措施等进行阐述和总结。     

Mixed analysis of shell and solid elements using the overlaying mesh method

 This article presents a mixed method of analyzing shell elements and solid elements using the overlaying mesh method. In the structural design of a ship's hull, the shell elements are used for the global model. However, the solid elements are necessary to analyze the stress concentration zones or the vicinity of a crack. In such cases, the models are analyzed using zooming analysis, in which the results of a global model analysis are transferred to a local model analysis by imposing boundary conditions. This method is more advantageous than zooming analysis in terms of the accuracy of the solution and the modeling flexibility. Some examples of a plate model with a cracked surface or with a projection are shown in order to demonstrate the effectiveness of the method. Received: August 6, 2002 / Accepted: November 25, 2002 Address correspondence to: S. Nakasumi (sumi@nasl.t.u-tokyo.ac.jp) Updated from the Japanese original, which won the 2002 SNAJ prize (J Soc Nav Archit Jpn 2001;189:219–224; and 190:655–662)     

Reliability-based calibration of fatigue design guidelines for ship structures

A simple reliability-based framework is applied to calibrate a new set of fatigue design guidelines. This new guideline considers two different approaches for the assessment of both loads, stresses and local stress raising effects, and partial safety factors must be given for any combination of these approaches. For the calibration, the lognormal reliability format is adopted because the hereby-derived partial safety factors can be combined arbitrarily. This means that with a few basic partial safety factors, the combination of partial safety factors to be applied together with any combination of calculation approaches can be determined easily. In the present paper both the adopted reliability format, the applied modeling of uncertainties and the selected target safety index are explained. Based on this, a new guideline is calibrated and the derived partial safety factors are presented. Finally, the new guideline is applied through a numerical example in order to show the applicability of the calibrated partial safety factors, and satisfactory results are found.