考虑高铁客运产品间交叉弹性的动态票价策略

将由特定高铁列车所提供的起讫点间的旅客运输服务定义为单个高铁客运产品。随着高速铁路越来越"公交化",同一起讫点间客运产品间的可替代性越来越强,票价的调整有了更精细化的要求。用经济学中的交叉弹性理论描述客运产品间的可替代程度,用指数需求函数描述客运产品的需求与票价的关系,构建并求解高铁动态票价优化模型,对客运产品间不同可替代程度下的最优动态票价策略进行研究。结果显示:高铁客运产品间的可替代性会影响票价策略的选择,且客运产品间可替代程度的增加是否有利于客票收益的提高与可行折扣票价集合的选取有关。     

Estimating potential reductions in externalities from rail-road substitution in Trans-European freight transport corridors

This paper develops a method for analysing and estimating savings in externalities that could be achieved by substituting truck with rail freight services in a given Trans-European freight transport corridor. The externalities affected include energy consumption, emissions of greenhouse gases, noise, congestion, and traffic incidents/accidents. The European Commission transport policy aims to provide an institutional framework for the medium- to long-term sustainable development of the transport sector. An important aspect of this policy is to stimulating the modal shift from truck to rail freight transport in inland Trans-European corridors.     

大轴力桩基托换变形控制值确定

研究目的:桩基托换是基础工程中的一个技术难题,而变形控制又是桩基托换的核心问题.本文简要介绍深圳地铁百货广场大厦下的桩基主动托换,并着重介绍变形控制值的分析确定.研究结果:确定了变形控制值,该控制值下的最大内力,是托换结构(托换大梁、托换桩等)设计的依据,也是托换施工过程动态监测的依据.     

Prioritizing new bicycle facilities to improve low-stress network connectivity

This paper introduces a new method to prioritize bicycle improvement projects based on accessibility to important destinations, such as grocery stores, banks, and restaurants. Central to the method is a new way to classify “bicycling stress” using marginal rates of substitution which are commonly developed through empirical behavioral research on bicyclist route choice. MRS values are input parameters representing bicycling stress associated with the number of lanes and speed limit of a street. The method was programmed as a geographic information system tool and requires commonly available data. The tool is demonstrated on three improvement scenarios that were recently proposed for Seattle, Washington. The full build-out scenario consists of 771 projects that include various new bike lanes, protected bike lanes, and multi-use trails. The tool produces priority rankings based on a project’s ability to improve low-stress connectivity between homes and important destinations. The analysis identifies specific areas and neighborhoods that can be expected to exhibit better bikeability. Transportation planners can use the tool to help communicate anticipated project impacts to decision-makers and the public.     

Formalization of Fault Analysis and a New Approach of Fault Detection

Introduction Since Boneh et al[1]announced a model forbreaking public key cryptographic schemes by tak-ing advantage of random hardware faults in 1996,fault analysis has become an important aspect ofcrypto-analysis method. Fault analysis inducesfaults in tamper-resistant chips by means of radia-tion, X-rays, micro-probing or cut wires, so thatsome information of keys could leak from chips. Biham &Shamir applied fault attack to the ex-tension of block cipher cryptosystems such asDES, and call…     

矩形花键滚刀设计CAD系统研究

介绍在微机上开发矩形花键滚刀设计CAD系统的方法,试运行结果表明,系统使用方便;该产品设计比原常规设计周期可缩短20～50倍。     

加速度计灵敏度校准方法的研究

加速度计已在汽车检测技术中得到广泛应用,加速度计灵敏度校准也愈发重要。通过对传统加速度计灵敏度的标定方法———背靠背方法的分析,提出了一种较为准确的加速度计灵敏度替代校准方法,比较了两种校准方法的优势,并解决了测试系统的安装及数据采集的技巧问题。     

基于滞留费用及时效性的空车调配优化模型

针对我国铁路空车需求量总体上大于供应量,以及时效性考虑不足的现状,考虑到空车(或以重代空的车)过早或过晚到达都会给铁路运输企业带来额外的费用,而且在空车总体供应量大于需求量的前提下,充分考虑车种代用和满足重点货物、重点客户对空车的需求条件。在此基础上,建立在区段空车运输能力约束条件下基于滞留费用及时效性的空车调配综合优化模型。     

Role of the Railways in the Future of Air Transport

Abstract

The role of the railways in the air transport industry is usually limited to provision of access to airports. However, the development of high-speed rail networks and the congestion and environmental problems faced by the air transport industry suggest the railways could have a greater role in working with the airlines to provide an integrated transport service for medium-distance journeys (up to 800 km). Many air journeys involve two flights and a transfer at a hub airport. The alternative being investigated here would replace air journeys by a rail journey and a flight, and a transfer between them at the hub airport. Such integration could offer a positive alternative to aircraft on some routes and lead to railway journeys to airports becoming part of air transport services, and not only to provide access to them. Integration could therefore provide a better use of available air capacity rather than duplicating some high-speed rail routes and services.     

R407C取代R22的工况计算及分析

围绕制冷剂发展历程和制冷剂技术更新进行了讨论.着重介绍制冷剂R407C替换制冷剂R22的工况计算,基于生产实践提出了制冷剂替换对系统的影响以及系统需要做出的改变.