通用雷达接口电路

本文针对雷达接口电路的方案设计和实现过程中的问题，首先对两种已经实现的雷达接口电路系统方案进行分析，据此提出以微处理器为核心的方案，然后重点讨论了通用性问题，并定量分析了时间资源对系统可行性的影响，最后说明了雷达接口电路的应用。     

有关船舶轴系监造的若干要领

从监造角度介绍新造船中有关船舶轴系检查和验收的经验和心得，提出了一些易被监造师忽视的重要环节。     

连云港海相软土基本特性与处理方法探讨

根据连云港地区多条高速公路工程的地质资料,并与我国部分沿海地区软土进行对比,分析连云港海相软土的基本物理力学指标统计特征、抗剪强度特性、固结变形特性以及蠕变特性,并介绍了适合于该海相软土的主要地基处理措施。     

船用伙食冷库自控系统的改造设计

文章针对早期船用伙食冷库以继电器为主导的控制系统所存在的问题,以某一滚装客船冷库为例,根据该冷库的运行技术特点,开发出以西门子s7系列可编程控制器为核心的自动控制系统,满足了冷库运行过程的精确掌控、节约耗能和可靠性等要求。     

相继增压系统对改善船用直列八缸发动机性能的试验研究

随着大型柴油发动机经济性和排放要求的不断提升,以及对发动机稳态、瞬态特性要求的不断提高,传统的涡轮增压系统已无法满足船用发动机全工况性能的要求。为了提高产品竞争力和适配性,针对某8缸直列船用柴油发动机开发了带有定压排气管的相继增压系统,并进行了发动机台架试验研究。结果表明：发动机中、低转速时,相继增压系统使发动机比油耗可以下降5%-10%,排气温度降低30%-45%,烟度下降55%-60%；最大扭矩可以提升15.1%-36.4%；发动机最大扭矩转速工况突加突卸响应性提升约28%-29%；相继增压系统中定压排气管的设计使得发动机高工况性能也有所提升,从而实现发动机全工况性能的提升。     

船舶液压起重机延迟反馈吊重消摆控制

由于操纵和工作环境的变化，起重机的吊重在工作过程中会产生摆动，这种摆动降低了起重机的工作效率和安全性能。文章以集美大学轮机工程实验中心船舶液压起重机为研究对象，采用机电液仿真建模技术及拉格朗日方程，在MATLAB Simulink仿真软件平台上，建立起重机操作液压系统及吊重摆动模型，采用与试验数据对比的方法对所建立的模型进行验证。设计基于吊重摆动位置延迟反馈的控制器，通过将延迟反馈信号叠加到操作信号上的方法实现吊重的消摆控制。结果表明，在各种操作情况下，延迟反馈控制器均能很好地抑制吊重的摆动。     

Comparing different contour methods with response-based methods for extreme ship response analysis

Environmental contours are often applied in probabilistic structural reliability analysis to identify extreme environmental conditions that may give rise to extreme loads and responses. They facilitate approximate long term analysis of critical structural responses in situations where computationally heavy and time-consuming response calculations makes full long-term analysis infeasible. The environmental contour method identifies extreme environmental conditions that are expected to give rise to extreme structural response of marine structures. The extreme responses can then be estimated by performing response calculations for environmental conditions along the contours.Response-based analysis is an alternative, where extreme value analysis is performed on the actual response rather than on the environmental conditions. For complex structures, this is often not practical due to computationally heavy response calculations. However, by establishing statistical emulators of the response, using machine learning techniques, one may obtain long time-series of the structural response and use this to estimate extreme responses.In this paper, various contour methods will be compared to response-based estimation of extreme vertical bending moment for a tanker. A response emulator based on Gaussian processes regression with adaptive sampling has been established based on response calculations from a hydrodynamic model. Long time-series of sea-state parameters such as significant wave height and wave period are used to construct N-year environmental contours and the extreme N-year response is estimated from numerical calculations for identified sea states. At the same time, the response emulator is applied on the time series to provide long time-series of structural response, in this case vertical bending moment of a tanker. Extreme value analysis is then performed directly on the responses to estimate the N-year extreme response. The results from either method will then be compared, and it is possible to evaluate the accuracy of the environmental contour method in estimating the response. Moreover, different contour methods will be compared.     

Compliance with MARPOL Annex VI regulation 14 by ships in the Gulf of Guinea sub-region: Issues,challenges and opportunities

The negative environmental and health impacts association with high sulphur dioxide emissions from shipboard machineries have been raised by various stakeholders within the marine transportation sector. It is against this backdrop that the International Maritime Organisation under the MARPOL Annex VI regulation 14 has capped sulphur emission to 0.1% for Sulphur Emission Control Areas and 0.5% for the other shipping nations. However, ship owners in the Gulf of Guinea (GoG) sub-region are facing multitudes of challenges in meeting up with this new IMO regulation. This paper aims to identify the main barriers hampering effective compliance to this new regulation by ships operating in the GoG, rank the barriers, and then discuss the possible opportunities that may arise as a result of addressing the challenges. To identify the main barriers, experts with several years of experience in the maritime industry from Ghana and Cameroun were used while multi-criteria decision-making (MCDM) method combining analytic hierarchy process (AHP) and technique for order preference by similarity to ideal solution (TOPSIS) was employed to rank the barriers. Other methods such as fuzzy AHP (FAHP), rank-order centroid (ROC) and TOPSIS were combined to validate the result of the study. The findings indicate that lack of infrastructure, lack of comprehensive marine air pollution laws and high capital and operational costs of sulphur reduction solutions emerged as the top three ranked barriers. The findings of this study can be useful to ship owners and policy makers in dealing with the issues of marine air pollution.     

基于两级温差发电的船舶废热回收试验研究

对于船舶柴油机而言,其所做功的30%都以废热的形式随尾气排放到了大气中。利用温差发电(TEG)技术回收船舶余热进行发电具有极其广阔的发展前景。因此提出了一种利用船舶柴油机尾气废热进行两级温差发电的新型装置。在对两级温差发电系统进行建模后,搭建了两级温差发电装置并进行了测试。理论分析和实验结果表明该装置利用温差发电技术对船舶余热回收是可行的。当热端温度达到473 K时,该温差发电实验装置可输出功率250 W,系统热效率为5.35％,相比单级TEG在相同条件下4.04％的热效率,该系统提高了32％。最后,对系统优化和装置的进一步改进进行了探讨。     

船舶中速主机低频排气噪声控制研究

结合在船舶建造中遇到的低频主机排气噪声控制问题,从实船噪声源的确定、主机排气噪声谱分析和消声器声学性能验证等方面进行探索,并从排气噪声控制角度对船舶柴油机排气系统设计提出了建议。