利用残余力概念进行结构损伤识别

提出一种利用残余力进行结构损伤识别方法。用刚度损伤系数将有限元模型参数化来描述结构的损伤。用特征值和特征向量预测算法构造目标函数,利用两点交叉算子的二进制代码的遗传算法反复迭代优化刚度损伤系数,获得待测结构的损伤系数、损伤位置与损伤程度的信息。通过一个平面桁架对该方法进行验证,结果表明:利用残余力概念进行损伤识别所得结构的损伤系数与理论值很接近。该方法能够较准确地判断结构的损伤位置和损伤程度。     

北美铁路降低轮轨接触应力新进展

介绍了北美铁路在降低轮轨接触应力和轮轨作用力方面的研究成果.     

盾构隧道联络通道施工中管片纵向应力变化

阐述地铁隧道联络通道施工过程中进行实时监测的重要作用,介绍钢弦式应变计的测试原理及安装方法.研究盾构隧道拆除联络通道洞门管片时的纵向应力变化规律,利用应变电测法,对北京地铁盾构法隧道某联络通道开洞过程进行应力监测,为保证施工部位和周围环境的安全提供可靠的监测数据.对监测数据进行统计,并对钢管片相邻的混凝土管片受力进行对比,分析施工引起的盾构隧道管片的应力变化规律,为工程的顺利进行提供指导.     

亚临界淬火对LZ50钢车轴性能的影响

对LZ50钢车轴亚临界淬火前后的力学性能、晶粒度以及车轴表面残余应力的变化进行了试验,分析了亚临界淬火对LZ50钢车轴拉伸性能和表面质量的影响。试验表明,亚临界淬火对车轴拉伸性能无明显影响,然而车轴表面的残余应力变化很大,可由拉应力改变为压应力,而且通过优化加工工艺,表面压应力的增幅会更大,说明亚临界淬火能有效提高车轴的疲劳寿命。     

A design method of tensile triangles and low transformation temperature weld metal for reduction of stress concentration and residual stress of welded joints

Stress concentration and residual stress have a significant influence on fatigue life of welded joints. In order to reduce the stress concentration of welded joints, a mathematical design method of tensile triangles (MTT) based on bionics was applied to weld shape design. Accordingly, the stress concentration of various weld beads in the corner boxing welded joint and the fillet welded T-joint was dissected using our in-house FEM software JWRIAN. It was found that there existed a large stress concentration in the conventional welded joints, whereas those welded joints with elongated weld bead were accompanied by a lower stress concentration, especially for elongated weld bead with MTT design. Furthermore, among the weld shapes of the corner boxing fillet welded joint, the rectangle shape of weld bead had the minimum stress concentration factor (1.05). For the fillet welded T-joint with MTT design, the stress concentration of weld toe decreased dramatically with the increase of the index of designed shape, but there was a minor difference of stress concentration at weld root between the weld beads with MTT design. In addition, application of low transformation temperature (LTT) weld metal utilizing martensitic transformation to the fillet welded T-joints can produce compressive residual stress at weld toe.     

Analysis of cross effect on inherent deformation during the line heating process – Part 1 – Single crossed heating lines

This paper describes the effect of previous heating on inherent deformation by a subsequent heating line, more specifically, the case of two heating lines intersecting (crossing) each other. The paper has been divided into two parts. In the first part, the case of single crossed heating lines is studied in detail. The second part of the paper, discusses the case of more than one crossed heating lines. The novelty of the work lies in revealing the cross effect and how, factors such as, for example, the heating condition and the plate geometry, influence the resulting inherent deformation of crossed heating. In addition, relationships to easily get these influences are provided. The results are suitable for a wide range of heating conditions and plate thickness.     

Assessment of fatigue strength of steel butt-welded joints in as-welded condition – Alternative approaches for curve fitting and mean stress effect analysis

Experimental fatigue data for butt-welded joints in as-welded condition and under constant amplitude tensile loading (secondary bending included) were analyzed using the nominal stress system and the notch stress system. Two approaches were used; a standard fitting procedure and minimization of the sum of squared perpendicular distances from a line with a fixed and free slope. In all cases, the latter method gave better agreement between the experimental and predicted fatigue life and fatigue strength. The analyses showed both with all broken specimen data included and with reduced data that the FAT225 curve, as recommended by IIW, might be too optimistic for the notch stress approach in the case of butt-welded joints in as-welded condition. It was also found that use of the local stress ratio instead of the applied stress ratio might explain many issues concerning current observations and apparent inconsistencies in reported literature.     

某预应力混凝土连续梁桥腹板裂缝成因分析

在分析预应力混凝土箱梁开裂主要原因的基础上,应用大型有限元软件Ansys,考虑纵、竖向预应力损失对腹板主应力的影响,分析了预应力混凝土连续梁桥的腹板裂缝问题,并结合有限元计算结果同某预应力混凝土连续箱梁桥裂缝现场观测资料进行对比研究,得出了一些重要而有益的结论。     

温度应力对既有混凝土连续箱梁桥开裂的影响分析

采用三维空间实体单元，在分析连续箱梁桥温度应力分布规律的基础上，研究了温度梯度、箱梁的肋板与顶板刚度比以及跨径比等参数变化对温度应力的影响，并分析比较了按《公路桥涵设计通用规范》JTJ021-89版和JTG D60-2004版计算的温度应力。结果表明，在JTG D60-2004版温度梯度荷载作用下，箱梁顶板上下缘产生较大的横向拉应力，顶底板上下缘产生较大的纵向拉应力，产生较大温度应力处与实桥出现裂缝的部位基本吻合，从中揭示了温度应力对既有混凝土连续箱梁桥开裂的影响。     

ANSYS在东风EQ140汽车车架刚度分析中的应用

应用ANSYS软件,完成了东风EQ140型汽车车架的刚度分析过程。通过建模、加载、解算及后处理等一系列步骤获得车架的扭转变形及应力,揭示出车架横梁在后桥支撑点存在扭转变形最大的问题,为车架的优化设计提供了重要依据。