基于BIM技术的测绘要素集成和模型共享方法研究

针对航道BIM设计过程中测绘要素集成和模型共享等方面存在的问题,提出一种基于BIM技术的测绘要素集成,及基于专用中间文件格式和公共数据模型格式实现测量BIM模型共享的方法。通过工程案例分析,阐述BIM技术在测绘要素集成及测量BIM模型传递共享的技术路线,结果表明基于BIM技术的测绘要素集成及模型共享具有优越性,研究成果可为开展测绘BIM工作提供借鉴。     

Statistical Approaches to Mapping QTL of Dynamic Traits

Dynamic traits are those that change with timein the development process of life or other quanti-tative factor (e. g. environmental condition).These traits also are called infinite-dimensionalcharacters by Kirkpatrick and Heckman[1]andfunction-valued traits by Pletcher and Geyer[2], be-cause they can be expressed as a function of someindependent and continuous variables. Dynamictraits are collected at many time points during thecourse of life. Therefore, studies of dynamic traitsare regarded…     

流函数法在减径拔管上限分析中的应用

应用流函数法建立减径拔管的动可容速度场，用上限原理得出减径拔管的上限解，分析了摩擦状态，变形程度及相对壁厚等工艺参数对拉拔载荷的影响，从而得出最佳工艺参数。     

基于专利数据的城市轨道交通技术发展现状与趋势分析

城市轨道交通是城市公共交通的重要组成部分,基于专利数据的城市轨道交通技术分析旨在发现城市轨道交通技术的发展现状与趋势,为城市轨道交通行业发展提供导向参考,为该领域研究人员提供情报支撑。基于世界知识产权组织的国内专利数据,综合利用专利计量、文本挖掘、关键词共现网络、专利地图方法,对国内城市轨道交通专利进行分析,结果表明国内城市轨道交通正处于稳中有升的成长期。     

Research on the Influence of Vertical Deformation of Bridge on the Track RegularityEI北大核心

Research purposes: The vertical deformation of high-speed railway (HSR) bridge will cause the track irregularity, which threatens the safe and efficient operation of the HSR. Taking the 32 m simple supported beam bridge as the research object, based on the existing mapping analytical model for bridge vertical deformation and rail geometry, the influence of the track regularity of the CRTS Ⅰ slab ballastless track structure caused by the key parameters such as the bridge vertical deformation amplitude, the hanging length of the beam end and the vertical stiffness of mortar layer were studied, and the corresponding measures to control the rail deformation were proposed, to provide theoretical reference for comprehensive treatment of rail deformation of HSR bridge. Research conclusions:(1) The pier settlement, the vertical rotation of the beam end and the beam fault will cause the rail to follow the beam deformation, and "up-warping" of the rail on the vertical deformation boundary will appear. (2) The rail deformation is directly proportional to the vertical deformation amplitude of the bridge and the key to control the rail deformation is to reduce the vertical deformation of the bridge. (3) The rail deformation can be controlled by reducing the hanging length of beam and vertical stiffness of mortar layer. (4) The research results can provide a theoretical reference for controlling the vertical rail deformation of high-speed railway bridges. © 2018, Editorial Department of Journal of Railway Engineering Society. All right reserved.     

用Logistic回归模型编制滑坡灾害敏感性区划图的方法研究

在GIS环境下应用Logistics回归模型编制地质灾害区划图。针对网格的生成、致灾因子的选择、不重合边界等问题,运用GIS的空间分析功能和SPSS的统计功能,消除了这些问题对滑坡灾害区划图的准确度的影响。结合贵州省的实际,根据历史灾害的分布情况,比较不同方法编制的滑坡灾害敏感性区划图,确定最优编制方法。对基于Logistic回归模型编制滑坡灾害敏感性区划图提出若干指导性建议,丰富和完善了Logistic回归模型编制滑坡灾害区划图方法体系。     

Tuning of transfer functions for analysis of wave–ship interactions

Transfer functions are often used together with a wave spectrum for analysis of wave–ship interactions, where one application addresses the prediction of wave-induced motions or other types of global responses. This paper presents a simple and practical method which can be used to tune the transfer function of such responses to facilitate improved prediction capability. The input to the method consists of a measured response, i.e. time series sequences from a given sensor, the 2D wave spectrum characterising the seaway in which the measurements are taken, and an initial estimate of the transfer function for the response in study. The paper presents results obtained using data from an in-service container ship. The 2D wave spectra are taken from the ERA5 database, while the transfer function is computed by a simple closed-form expression. The paper shows that the application of the tuned transfer function leads to predictions which are significantly improved compared to using the transfer function without tuning.     

The role of volume-delay functions in forecasting and evaluating congestion charging schemes: the Stockholm case

This paper uses observations from before and during the Stockkholm congestion charging trial in order to validate and improve a transportation model for Stockholm. The model overestimates the impact of the charges on traffic volumes while at the same time it substantially underestimates the impact on travel times. These forecast errors lead to considerable underestimation of economic benefits which are dominated by travel time savings. The source of error lies in the static assignment that is used in the model. Making the volume-delay functions (VDFs) steeper only marginally improves the quality of forecast but strongly impacts the result of benefit calculations. We therefore conclude that the dynamic assignment is crucial for an informed decision on introducing measures aimed at relieving congestion. However, in the absence of such a calibrated dynamic model for a city, we recommend that at least a sensitivity analysis with respect to the slope of VDFs is performed.     

管道惯性测绘系统研制及应用

针对管道中心线地理坐标信息的测量需求,基于惯性导航原理,研制了以管道内检测器为载体的管道中心线测绘内检测设备,并将其与漏磁内检测器结合进行工程应用。选取了5处已知点对测绘结果进行了验证,测绘结果和实际验证结果表明:研制的惯性导航内检测器能够准确测绘管道中心线轨迹坐标,在校验点间距约为2 km时,5个距校验点约1 km的已知点的平均测绘误差约为1.8 m;通过将惯性导航检测器与漏磁检测器的组合使用,可有效获取管道缺陷的地理坐标信息,提高了管道内检测缺陷检测定位的精度。