臂式地铁接触轨几何状态参数检测小车研究

为解决地铁接触轨几何状态参数人工检测精度低、效率低、工人劳动强度大等问题,在调研国内外相关技术现状的基础上,充分考虑测量精度和效率要求、测量空间对测量机构体积和质量的限制等内外部因素,研发一种基于平行四边形机构的臂式地铁接触轨几何状态参数连续检测小车。小车基于接触式测量原理,对小车进行机械机构设计和参数设计,建立数学模型,然后对采集的数据进行计算分析,验证接触式测量的有效性。试验证明,该检测小车拉出值的综合检测精度达到0. 1 mm,导高综合检测精度达0. 17 mm,其测量效率和精度能很好地满足地铁接触轨几何状态参数检测的要求。     

弓网接触力检测方法介绍

通过检测弓网之间的接触力可以获得接触网与受电弓之间接触状况及其存在缺陷的数据信息,从而指导接触网的维修作业,以保证电气化铁路运输生产安全。介绍目前各国常用几种弓网接触力检测技术及方法,并对其进行综合对比分析,以供我国电气化铁路弓网检测技术研究和应用参考。     

电气化铁路用压接式接触线电连接线夹试验分析与研究

从接触网用压接式接触线电连接线夹的技术条件、成型机理及影响因素等方面入手,利用理论计算和试验验证等手段,分析电连接线夹产生松脱及裂纹的原因。同时,对进口及国产电连接线夹的化学成分、物理性能、机械性能、电学性能和压接工艺进行了试验和研究,并提出改进建议。     

Wheel-rail contact models for vehicle system dynamics including multi-point contact

Advanced modelling of rail vehicle dynamics requires realistic solutions of contact problems for wheels and rails that are able to describe contact singularities, encountered for wheels and rails. The basic singularities demonstrate themselves as double and multiple contact patches. The solutions of the contact problems have to be known practically in each step of the numerical integration of the differential equations of the model. The existing fast, approximate methods of solution to achieve this goal have been outlined. One way to do this is to replace a multi-point contact by a set of ellipses. The other methods are based on so-called virtual penetration. They allow calculating the non-elliptical, multiple contact patches and creep forces online, during integration of the model. This allows nearly real-time simulations. The methods are valid and applicable for so-called quasi-Hertzian cases, when the contact conditions do not deviate much from the assumptions of the Hertz theory. It is believed that it is worthwhile to use them in other cases too.     

哈牡线季节性冻土接触网基础处理措施探讨

针对哈尔滨至牡丹江电气化改造工程季节性冻土分布的实际工程特点,结合季节性冻土条件下接触网基础的设计理念,对本项目选用的扩大型钢柱基础和不带扩底的拉线基础进行切向冻胀应力计算分析,并考虑影响切向冻胀力的水分、土质、负温以及基础侧表面的粗糙度等主要因素,提出了对钢柱基础采用换填加扩大型基础的处理措施,对接触网的下锚拉线基础提出了换填及加大埋深等防冻胀处理措施以抵抗季节性冻土的上拔力。     

Catenary riser sliding and rolling on seabed during induced lateral movement

Catenary risers have an interaction zone with the seabed, usually referenced as flowline. Movements in this region can be induced by sea currents and large offsets in floating unit, leading to touchdown position changes and affecting internal loads along riser length. In this work the contact flowline-seabed is modeled including sliding and rolling friction. Case studies involving large offsets in floating unit and lateral sea currents are solved to better understand the consequences of possible rolling and large sliding. The riser is modeled using a geometrically-exact finite element beam model. The contact is addressed with a new technique to include rotation movements from underlying beam models. This leads to global riser models including complex kinematics, being able to represent scenarios with alternating sliding/rolling and its consequences on internal loads of riser structure. A parametric study is performed to measure the influence of the friction coefficient in tension and torsion along typical flexible pipe and steel pipe catenary risers.     

水润滑橡胶轴承板条型式及硬度分区对接触性能影响研究

轴承硬度分区设计思想的提出,为改善轴承接触性能提供了新思路。板条式水润滑橡胶应用广泛,针对凹面型、平面型、凸面型三种不同的板条型式,结合硬度分区设计的思想,对板条型式及硬度分区对接触陛能的影响进行了研究。建立了未进行硬度分区和分区后三种板条型式下的轴段与轴承有限元接触模型,对比分析了三种不同板条型式下硬度分区对接触性能的影响效果。结果表明,硬度分区能显著改善轴承的接触性能,凹面型板条型式的静态接触性能较佳。     

转向器齿轮齿条传动副的几何和啮合计算

齿轮齿条式转向器中的齿轮齿数仅有5～8个齿，按标准齿轮或简单变位齿轮的几何计算方法设计齿轮和齿争，无法使其重合度达到1.0.文章介绍了运用虚拟齿轮及当量齿轮的方法计算重合度，并通过大量计算得到参数选择表，方便设计师的查阅使用。阐述了齿轮齿顶圆齿厚计算方法、齿条齿根圆角及齿务齿根过渡曲线干涉验算方法。表明通过合理选择变位系数、齿顶高及齿根高，可以确保齿轮和齿顶圆齿厚达到0．3—0．5个模数，重合度达到1．0。并给出计算实例：     

从消防角度探讨地铁隧道疏散平台的设计问题

疏散平台是地铁隧道消防安全的必要保障,但疏散平台的主要作用是中转,道床面才是疏散的主要途径。从消防疏散的角度出发,探讨地铁隧道内设置疏散平台的重要性,并对疏散平台和道床面的主要作用进行了对比说明,重点分析疏散平台设置步梯的必要性和步梯给区间管线安装带来的问题,最后提出相关技术主张。     

基于ABAQUS的地质偏压隧道非线性接触分析

针对于山岭隧道常出现的,穿越倾斜产状的层状岩体,或多在隧道进出口处节理裂隙发育的情况,结合成兰铁路茂县隧道出口地段所处的地质偏压环境,应用ABAQUS有限元分析软件中的面-面接触单元,建立节理软弱结构面的二维隧道模型。并对地质偏压隧道的围岩压力及衬砌结构内力进行非线性接触分析和计算,初步得出单线铁路隧道在地质偏压情况下围岩和衬砌结构的位移、应力的分布特征,并讨论软弱结构面的摩擦系数对隧道偏压作用的影响,根据隧道受力特点提出隧道在地质偏压情况下可能采取的建议和措施。