成都轨道交通环线客流特征分析及运营模式研究

针对轨道交通环线大多采用的"鱼刺图"客流断面表达形式及内外环对称开行的运营模式存在的问题,通过运用国内首创的环形客流断面图对环线客流特征进行直观表达,在此基础上对其运营组织模式进行研究并提出不同的运营模式供灵活选择,以期对后续其他城市环线的设计提供参考。研究结论:(1)环线有别于放射性线路具有明显的客流特征差异,运用环形客流断面图方式,可读性和直观性更强。(2)根据环线的不同客流特征提出内外环对称、内外环不对称、大小交路、单向收发车4种运营模式。4种运营模式各有自身的适应性,在具体项目应用时应结合实际线路沿线站点情况及客流特征进行进一步研究比选。     

Effects of the Los Angeles transit strike on highway congestion

In this paper we investigate the effect of the Los Angeles transit strike on highway congestion through analysis of highway sensor data, using both a before-and-after comparison, and a control group comparison. We found that average 5:00 a.m. to 10:00 p.m. traffic speeds declined by as much as 20% during the strike, and the average length of the rush period increased by as much as 200%, even though increases in traffic were small, despite the fact that transit riders constitute a small fraction of the traveling population. Speeds declined the most at locations upstream from the places where queues normally end. We believe that highways are especially susceptible to congestion during strikes because travelers have little opportunity to adjust and equilibrate their travel patterns, as is possible during ordinary periods of traffic growth.     

浪涌发生器放电回路的分析

根据电磁兼容试验和雷电冲击试验过程中所使用模拟浪涌发生器的工作原理,结合现行标准中普遍执行的8/20μs和10/700μs试验波形,通过二阶微分方程求解和MATLAB计算仿真,得到不同波形模拟浪涌发生器放电回路的组成及元器件参数,为浪涌试验中出现的问题提供分析方法和解决办法。     

基于dSPACE半实物仿真平台的永磁同步电动机数学模型的实现

介绍了永磁同步电机的数学模型以及基于MATLAB/Simulink中的S函数进行的离线仿真和基于dSPACE平台的半实物仿真.离线仿真和半实物仿真结果都表明了模型和S函数的正确性、有效性.通过半实物仿真,突出了ControlDesk在实时仿真中的优越性.     

Vehicle reidentification and travel time measurement on congested freeways

The paper presents an algorithm for matching individual vehicles measured at a freeway detector with the vehicles’ corresponding measurements taken earlier at another detector located upstream. Although this algorithm is potentially compatible with many vehicle detector technologies, the paper illustrates the method using existing dual-loop detectors to measure vehicle lengths. This detector technology has seen widespread deployment for velocity measurement. Since the detectors were not developed to measure vehicle length, these measurements can include significant errors. To overcome this problem, the algorithm exploits drivers’ tendencies to retain their positions within dense platoons. The otherwise complicated task of vehicle reidentification is carried out by matching these platoons rather than individual vehicles. Of course once a vehicle has been matched across neighboring detector stations, the difference in its arrival time at each station defines the vehicle’s travel time on the intervening segment.Findings from an application of the algorithm over a 1/3 mile long segment are presented herein and they indicate that a sufficient number of vehicles can be matched for the purpose of traffic surveillance. As such, the algorithm extracts travel time data without requiring the deployment of new detector technologies. In addition to the immediate impacts on traffic monitoring, the work provides a means to quantify the potential benefits of emerging detector technologies that promise to extract more detailed information from individual vehicles.     

Macroscopic Fundamental Diagrams: A cross-comparison of estimation methods

This paper aims to cross-compare existing estimation methods for the Macroscopic Fundamental Diagram. Raw data are provided by a mesoscopic simulation tool for two typical networks that mimic an urban corridor and a meshed urban center. We mainly focus on homogenous network loading in order to fairly cross-compare the different methods with the analytical reference. It appears that the only way to estimate the MFD without bias is to have the full information of vehicle trajectories over the network and to apply Edie’s definitions. Combining information from probes (mean network speed) and loop detectors (mean network flow) also provides accurate results even for low sampling rate (<10%). Loop detectors fail to provide a good estimation for mean network speed or density because they cannot capture the traffic spatial dynamics over links. This paper proposes a simple adjustment technic in order to reduce the discrepancy when only loop detectors are available.     

A mixed-integer linear program for optimizing sensor locations along freeway corridors

How to optimally allocate limited freeway sensor resources is of great interest to transportation engineers. In this paper, we focus on the optimal allocation of point sensors, such as loop detectors, to minimize performance measurement errors. Although it has been shown that the minimization problem can be intuitively formulated as a nonlinear program, the formulation is so complex that only heuristic approaches can be used to solve the problem. In this paper, we transform the nonlinear program into an equivalent mixed-integer linear model. The linearized model is shown to have a graphical interpretation and can be solved using resource constrained shortest path algorithms. A customized Branch-and-Bound technique is then proposed to solve the resource constrained shortest path problem. Numerical experiments along an urban freeway corridor demonstrate that this sensor location model is successful in allocating loop detectors to improve the accuracy of travel time estimation.     

重庆山区绕城高速公路立交规划与思考

文章以重庆绕城高速公路立交规划布局为研究基础,对城市外环高速公路立交的布局、等级、技术条件、类型和方案进行了较深入的探讨,并结合工程实践,提出了关于城市外环立交规划布局的几个关键问题的意见和建议。     

闭环增益成形算法在船舶自动舵中的应用

根据船舶自动舵闭环频谱要求,给出一种新的基于闭环增益成形的控制算法,新算法从设计的根本上保证控制器具有良好的控制性能和鲁棒性能,从理论上可推出船舶航向ＰＤ控制是新算法的特例,新算法设计过程简单,物理意义明显     

基于行程时间估计的快速路检测器布设密度优化方法研究

随着智能交通运输系统对道路实时交通信息的迫切需求,布设高密度、全方位的交通检测器已成为共识,但是高密度的检测器布设带来的是硬件投资的急剧增加,因此有必要进行检测器布设密度的优化。利用快速路行程时间估计方法分析了检测器布设密度优化问题,认为从行程时间估计误差和合理投资的角度出发,检测器布设并不是密度越大效果越好,而是存在一个合理范围,该范围可以指导工程中实际检测器数目的选择。