利用残余力概念进行结构损伤识别

提出一种利用残余力进行结构损伤识别方法。用刚度损伤系数将有限元模型参数化来描述结构的损伤。用特征值和特征向量预测算法构造目标函数,利用两点交叉算子的二进制代码的遗传算法反复迭代优化刚度损伤系数,获得待测结构的损伤系数、损伤位置与损伤程度的信息。通过一个平面桁架对该方法进行验证,结果表明:利用残余力概念进行损伤识别所得结构的损伤系数与理论值很接近。该方法能够较准确地判断结构的损伤位置和损伤程度。     

"友谊号"FPSO生产工艺流程改造

“友谊号”FPSO经过升级改造变成一艘具有原油开发综合处理功能的中心平台。文章分别介绍了该FPSO改装后的原油处理系统、污水处理系统、伴生气和天然气处理系统的工艺流程。     

高分子复合材料在地铁工程中的应用技术

通过对高分子复合材料进行改性（调整树脂的分子结构及材料组成）,使材料具有良好的防火性能、耐高温性能及抗电化腐蚀性能,成为高性能的热固性复合材料。在地铁的地下工程中采用该类材料制作的疏散平台可从根本上改变地铁火灾状态下的疏散模式,对提高地铁结构的使用寿命及安全性都具有重要的作用。     

上海轨道交通4号线列车客室照明节能改造研究

以上海轨道交通4号线列车客室照明作为节能改造的研究对象,介绍了4号线列车客室照明系统的技术特点与4号线沿线典型运营条件。提出了采用LED(发光二极管)灯具替代荧光灯具以及在照明控制电路中嵌入光敏节能控制器的改造方案,可实现4号线列车客室照明系统55%以上的节能率。     

亚临界淬火对LZ50钢车轴性能的影响

对LZ50钢车轴亚临界淬火前后的力学性能、晶粒度以及车轴表面残余应力的变化进行了试验,分析了亚临界淬火对LZ50钢车轴拉伸性能和表面质量的影响。试验表明,亚临界淬火对车轴拉伸性能无明显影响,然而车轴表面的残余应力变化很大,可由拉应力改变为压应力,而且通过优化加工工艺,表面压应力的增幅会更大,说明亚临界淬火能有效提高车轴的疲劳寿命。     

车辆动力传动系固有特性灵敏度分析及动力学修改

分析了车辆动力传动系无阻尼自由振动固有特性的灵敏度，特别给出了固有频率和振型对轴系刚度及惯量等物理参数的灵敏度。基于固有特性灵敏度分析，给出了动力学修改的计算方法。并以某重型车辆动力传动系为实例计算并分析了其固有频率和振型的灵敏度问题，在此基础上进行了动力学修改。     

沥青混凝土搅拌机燃用重渣油的尝试

为降低沥青混凝土搅拌机的生产成本,采用ZZR重渣油燃烧机替代柴油燃烧机取得了很好的经济效益,给出了燃渣油时渣油含水及油路阻塞的判断方法,并介绍了出现故障的排除方法.     

A design method of tensile triangles and low transformation temperature weld metal for reduction of stress concentration and residual stress of welded joints

Stress concentration and residual stress have a significant influence on fatigue life of welded joints. In order to reduce the stress concentration of welded joints, a mathematical design method of tensile triangles (MTT) based on bionics was applied to weld shape design. Accordingly, the stress concentration of various weld beads in the corner boxing welded joint and the fillet welded T-joint was dissected using our in-house FEM software JWRIAN. It was found that there existed a large stress concentration in the conventional welded joints, whereas those welded joints with elongated weld bead were accompanied by a lower stress concentration, especially for elongated weld bead with MTT design. Furthermore, among the weld shapes of the corner boxing fillet welded joint, the rectangle shape of weld bead had the minimum stress concentration factor (1.05). For the fillet welded T-joint with MTT design, the stress concentration of weld toe decreased dramatically with the increase of the index of designed shape, but there was a minor difference of stress concentration at weld root between the weld beads with MTT design. In addition, application of low transformation temperature (LTT) weld metal utilizing martensitic transformation to the fillet welded T-joints can produce compressive residual stress at weld toe.     

Analysis of cross effect on inherent deformation during the line heating process – Part 1 – Single crossed heating lines

This paper describes the effect of previous heating on inherent deformation by a subsequent heating line, more specifically, the case of two heating lines intersecting (crossing) each other. The paper has been divided into two parts. In the first part, the case of single crossed heating lines is studied in detail. The second part of the paper, discusses the case of more than one crossed heating lines. The novelty of the work lies in revealing the cross effect and how, factors such as, for example, the heating condition and the plate geometry, influence the resulting inherent deformation of crossed heating. In addition, relationships to easily get these influences are provided. The results are suitable for a wide range of heating conditions and plate thickness.