福州东(樟林)车辆段工艺设计实践与创新

随着铁路建设的发展,福建省境内货车保有量大幅度增长,货车检修任务量增加迅速。樟林编组站位于福州枢纽,具备良好的扣车条件,在此新建1处货车车辆段将解决整个福建省货车的定期检修工作,而且能保障列车的运行安全,节约运输成本以及货车周转时间。福州东车辆段出入段线下穿既有温福铁路,有利于行车组织、运营安全。总图因地制宜全创新提出存车线(预检预修)与修车库贯通布置方案。充分梳理预检预修与架落车工艺,提出独立设置预检预修设施。论述抛丸除锈设备独立设置、转向架单臂悬挂检修流水线等修车库与联合车库创新设计,福州东(樟林)车辆段设计实现了创新理念和工程实际的协调统一。     

铁道车辆脱轨检测装置的设计

概括介绍了国内外铁道车辆脱轨检测现状,以及铁道车辆脱轨检测装置的技术方案、工作原理、研制过程及其应用情况。     

Experimental and numerical investigation on the derailment of a railway wheelset with solid axle

This paper presents the results of an experimental and numerical investigation on the derailment of a railway wheelset with solid axle. Tests were carried out under quasi-steady-state conditions, on a full-scale roller rig, and allowed to point out the effect of different parameters like the wheelset's angle of attack and the ratio between the vertical loads acting on the flanging and non-flanging wheels. On the basis of the test results, some existing derailment criteria are analysed in this paper and two new criteria are proposed. A model of wheel–rail contact is proposed for the mathematical modelling of the flange climb process, and numerical vs. experimental comparisons are used to obtain model validation.     

Coupler jackknifing and derailments of locomotives on tangent track

A number of derailments occurred in recent years due to coupler jackknifing, some of them were reported on tangent tracks where conventionally thought to be the safer sections. This article studied coupler jackknifing behaviour and its implications for locomotive safety on tangent tracks from the experience of China heavy haul. Three types of coupler systems were modelled and simulated regarding coupler jackknifing behaviour. Two typical locomotive derailments occurred on tangent tracks were analysed. From the derailment experience, coupler angle self-lock behaviour was introduced and simulated. An approach to determine coupler angles in the jackknifed position was derived and validated with a self-coded program and SIMPACK. Methods to prevent coupler jackknifing were also evaluated with regard to locomotive stability.     

Study on the derailment behaviour of a railway wheelset with solid axles in a railway turnout

ABSTRACT

Dynamic wheel–rail interaction in railway turnouts is more complicated than on ordinary track. In order to evaluate the derailment behaviour of railway wheelsets in railway turnouts, this paper presents a study of dynamic wheel–rail interaction during a wheel flange climbs on the turnout rails, by applying the elasticity positioning wheelset model. A numerical model is established based on a coupled finite element method and multi-body dynamics, and applied to study the derailment behaviour of a railway wheelset in both the facing and trailing directions in a railway turnout, as well as dynamic wheel–turnout rail interaction during the wheel flange climbing on the turnout rails. The influence of the wheel–rail attack angle and the friction coefficient on the dynamic derailment behaviour is investigated through the proposed model. The results show that the derailment safety for a wheelset passing the railway turnout in facing direction is significantly lower than that for the trailing direction and the ordinary track. The possibility of derailment for the wheelset passing the railway turnout in facing and trailing directions at positive wheel–rail attack angles will increase with an increase in the attack angles, and the possibility of derailment can be reduced by decreasing the friction coefficient.     

铁路矩形墩桥梁横向振动试验研究

通过对京通线银镇沟桥的现场振动测试 ,得到该桥的横向振动特性 ,给出桥上列车轮轨作用力的典型时程曲线和列车的脱轨系数及轮重减载率 ,为进一步研究矩形桥墩的横向振动提供实测数据。     

事故树分析法在城市轨道交通事故分析中的应用

从系统工程学的角度出发,将广泛应用于系统安全研究中的事故树分析方法应用到城市轨道交通事故分析中。分析城市轨道交通运营事故中脱轨这一典型事故。通过分析引起列车脱轨事故各个因素,得出城市轨道交通脱轨事故的发生概率较小,预防和控制难度较大的结论。该研究有助于城市轨道交通运营公司对引起该事故发生的各个因素提高警惕意识,也为运营安全管理工作提供理论依据。     

不同车轮踏面对高速轮轨关系的影响研究

根据中国高速铁路的现状,在轮对内侧距选用1353、轨底坡选用1:40、钢轨选用中国高速钢轨cHN60的前提下,研究了CRH2上使用的LMa、CRH3上使用的S1002G和日本新干线圆弧车轮JP-ARC这3种踏面对CHN60轮轨的影响.研究结果表明,LMa与CHN60的轮轨接触点分布比较均匀,有利于车轮型面的保持;其次是...     

Structural safety of trams in case of misguidance in a switch

Tram vehicles mainly operate on street tracks where sometimes misguidance in switches occurs due to unfavourable conditions. Generally, in this situation, the first running gear of the vehicle follows the bend track while the next running gears continue straight ahead. This leads to a constraint that can only be solved if the vehicle's articulation is damaged or the wheel derails. The last-mentioned situation is less critical in terms of safety and costs. Five different tram types, one of them high floor, the rest low floor, were examined analytically. Numerical simulation was used to determine which wheel would be the first to derail and what level of force is needed in the articulation area between two carbodies to make a tram derail. It was shown that with pure analytical simulation, only an idea of which tram type behaves better or worse in such a situation can be gained, while a three-dimensional computational simulation gives more realistic values for the forces that arise. Three of the four low-floor tram types need much higher articulation forces to make a wheel derail in a switch misguidance situation. One particular three-car type with two single-axle running gears underneath the centre car must be designed to withstand nearly three times higher articulation forces than a conventional high-floor articulated tram. Tram designers must be aware of that and should design the carbody accordingly.     

Indirect method for wheel–rail force measurement and derailment evaluation

Wheel set flange derailment criteria for railway vehicles are derived and the influence of wheel–rail contact parameters is studied. An indirect method for wheel–rail force measurement based on these derailment evaluation criteria is proposed. Laboratory tests for the calibration of strain–force devices on the bearing box are carried out to determine the relationship between the applied force and the measured strain. The simulation package, SIMPACK, is used to develop a passenger car model to generate wheel–rail forces and vibration signals. Different cases are considered in this model to provide an accurate validation of the identified wheel–rail forces. A feasibility test is conducted in the Beijing Loop test line using a passenger car equipped with a set of strain gauges on the wheel set. The comparison of the force time history applied to the instrumented wheel set and that obtained using the indirect method is presented.