《MARPOL73/78》附则VI与柴油机NO_x排放控制技术

着重介绍《MARPOL 73/78》附则VI的起源和发达国家船舶柴油机氮氧化物(NOx)的排放控制技术发展状况,随着《MARPOL 73/78》附则VI的正式实施和今后国际海事组织(IMO)对《MARPOL 73/78》附则VI的进一步修订,船舶柴油机NOx的排放控制及其相关技术会受到包括轮机管理在内的相关人员越来越多的关注。     

碳纤维技术在桥梁加固工程中应用的探讨

通过对比跨度32 m铁路预应力混凝土梁用不同方法加固前后的力学性能,研究碳纤维加固技术应用的适宜场合。研究结果表明:在抗弯加固方面,碳纤维加固更适合于原结构高度较小、配筋较少、荷载变化不大的构件;对于梁高大、配筋多、活载作用大的桥梁,特别是预应力混凝土梁,因新增碳纤维的面积远远小于实体梁面积,加固后构件的刚度,钢筋应力的改善有限,其加固的效果不如预应力加固。采用黏贴碳纤维布的加固方法基本无法提高实体梁的抗裂性能,但在梁体开裂后,碳纤维对梁体的裂缝发展有较好的约束作用。     

进气预混甲醇降低柴油机碳烟与NOx排放的影响参数研究

在485QDI自然吸气直喷式柴油机上研究了不同喷嘴、不同供油定时、不同喷醇的起点对进气预混甲醇发动机的碳烟、NOx排放和经济性的影响。研究结果表明，为了降低碳烟和NOx排放以及提高燃油经济性，与燃用纯柴油的发动机相比，进气预混甲醇发动机的柴油喷射定时可以保持不变或稍小，但燃油喷嘴的孔径应适当减小，预混甲醇的发动机负荷起点应适中。     

汽车用碳纤维复合摩阻材料的摩擦磨损特性研究

在采用正交设计优化碳纤维复合摩阻材料的基础上，针对汽车制动器衬片的实际工况，研究了碳纤维复合摩阻材料的摩擦磨损特性及磨损机制分析了碳纤维含量、强度及表面状态等对磨损机制的影响。研究结果表明，碳纤维复合摩阻材料的磨损性能、工作寿命及抗热衰退性能均明显高于传统的石棉摩阻材料。     

柴油、乳化油和甲醇喷雾燃烧光强波的研究

探讨了柴油机燃烧光强波的性质。在不同压力、氧浓度的条件下，对柴油、乳化油、甲酵喷雾的燃烧光强波进行了测量分析。结果表明，柴油机的燃烧光强波所反应的是火焰内碳粒的氧化历程。对于不同的燃料，燃烧光强波的强弱并不仅仅取决于火焰中碳粒的数量，同时还取决于火焰中的氧浓度。     

GZ机油添加剂对发动机环保性能影响的试验研究

通过对各种汽油机、柴油机进行的有无GZ添加剂时的对比试验,证明了GZ机油添加剂能降低发动机的机械噪声,减少柴油机排气烟度和汽油机的怠速有害排放,改善发动机的环保性能。     

Correlation between automotive CO, HC, NO, and PM emission factors from on-road remote sensing: implications for inspection and maintenance programs

Carbon monoxide (CO), hydrocarbon (HC), and nitrogen oxide (NO) emission factors (EFs) are measured with a commercial vehicle emissions remote sensing system (VERSS) during a large-scale vehicle exhaust emissions study in Las Vegas. Particulate matter (PM) EFs are simultaneously measured for individual vehicles with a newly developed PM-VERSS based on ultraviolet backscatter light detection and ranging (Lidar). The effectiveness of CO and HC EFs as proxy for NO and PM EFs for spark-ignition vehicles is evaluated. Poor correlations were found between EFs for pollutants on an individual vehicle basis indicating that high EFs for one or more pollutants cannot be used as a predictor of high EFs for other pollutants. Stronger functional relationships became evident after averaging the EF data in bins based on rank-order of a single pollutant EF. Low overlap between the highest 10% emitters for CO, HC, NO, and PM was found. These results imply that for an effective reduction of the four pollutants, inspection and maintenance (I/M) programs, including clean screening, should measure all four pollutants individually. Fleet average CO and HC concentrations determined by gaseous VERSS were compared with fleet average CO and HC concentrations measured at low-idle and at high-idle during local I/M tests for spark-ignition vehicles. The fleet average CO concentrations measured by I/M tests at either idle were about half of those measured by remote sensing. The fleet average high-idle HC concentration measured by I/M tests was about half of that measured by VERSS while low-idle I/M and VERSS HC average concentrations were in better agreement. For a typical vehicle trip, most of the fuel is burned during non-idle conditions. I/M measurements collected during idling conditions may not be a good indicator of a vehicle’s potential to be a high emitter. VERSS measurements, when the vehicle is under a load, should more effectively identify high emitting vehicles that have a large contribution to the mobile emissions inventory.     

国产摩托车排放现状及控制进程分析

本文根据百余种国产摩托车排气污染物底盘测功机工况法测试结果，建立了相应的数据库，本文综述了国产摩托车排气污染物排放现状，在对欧洲和台洲摩托车排放控制进行考察和分析的基础上，结合我国情况，提出了摩托车排放控制进程建议。     

Greenhouse gas emissions from ships in ports – Case studies in four continents

Emissions of GHG from the transport sector and how to reduce them are major challenges for policy makers. The purpose of this paper is to analyse the level of greenhouse gas (GHG) emissions from ships while in port based on annual data from Port of Gothenburg, Port of Long Beach, Port of Osaka and Sydney Ports. Port call statistics including IMO number, ship name, berth number and time spent at berth for each ship call, were provided by each participating port. The IMO numbers were used to match each port call to ship specifications from the IHS database Sea-web. All data were analysed with a model developed by the IVL Swedish Environmental Research Institute for the purpose of quantifying GHG emissions (as CO₂-equivalent) from ships in the port area. Emissions from five operational modes are summed in order to account for ship operations in the different traffic areas. The model estimates total GHG emissions of 150,000, 240,000, 97,000, and 95,000 tonnes CO₂ equivalents per year for Gothenburg, Long Beach, Osaka, and Sydney, respectively. Four important emission-reduction measures are discussed: reduced speed in fairway channels, on-shore power supply, reduced turnaround time at berth and alternative fuels. It is argued that the potential to reduce emissions in a port area depends on how often a ship revisits a port: there it in general is easier to implement measures for high-frequent liners. Ships that call 10 times or less contribute significantly to emissions in all ports.     

Experimental evaluation of Heavy Duty Vehicle speed patterns in urban and port areas and estimation of their fuel consumption and exhaust emissions

Exhaust emissions and fuel consumption of Heavy Duty Vehicles (HDVs) in urban and port areas were evaluated through a dedicated investigation. The HDV fleet composition and traffic driving from highways to the maritime port of Genoa and crossing the city were analysed. Typical urban trips linking highway exits to port gates and HDV mission profiles within the port area were defined. A validation was performed through on-board instrumentation to record HDV instantaneous speeds in urban and port zones. A statistical procedure enabled the building-up of representative speed patterns. High contrasts and specific driving conditions were observed in the port area. Representative speed profiles were then used to simulate fuel consumption and emissions for HDVs, using the Passenger car and Heavy duty Emission Model (PHEM). Complementary estimations were derived from Copert and HBEFA methodologies, allowing the comparison of different calculation approaches and scales. Finally, PHEM was implemented to assess the performances of EGR or SCR systems for NO_X reduction in urban driving and at very low speeds.The method and results of the investigation are presented. Fuel consumption and pollutant emission estimation through different methodologies are discussed, as well as the necessity of characterizing very local driving conditions for appropriate assessment.