斜拉索-磁流变阻尼器多性能约束下的减振控制算法

提出一种极点和方差指标约束下的斜拉索-磁流变减振控制算法。基于Halmiton原理与切比雪夫级数求解方法建立斜拉索-阻尼器减振控制系统状态空间方程。以极点表达减振控制快速性和稳定性约束,以方差表达小振幅和振速约束,基于凸优化理论,给出满足相容快速性、稳定性、小振幅以及振速指标约束下的磁流变半主动减振控制算法。最后,以某斜拉桥C20号斜拉索为例进行仿真验证。结果表明,给出的减振控制算法能保证斜拉索在随机外界激励下的快速性稳定性,且有效抑制拉索的振幅,减振效果良好。     

The vulnerability of the environment to spills of dangerous substances on highways: A diagnosis based on multi criteria modeling

Highways and freeways are the main infrastructure channel used to transport cargo in Brazil. This cargo often includes dangerous chemical products which can, in the event of an accident, negatively impact the environment. The development and implementation of tools for the rapid diagnosis of environmental vulnerability in the transportation of dangerous goods has been studied. However, for highways and freeways there is a lack of studies based on environmental attributes, and not just based on statistical data which demands a specific period for collection and analysis and only after that the implementation of preventive measures. Thus, evaluation grounded on multiple criteria embedded in Geographic Information System (GIS) has significant potential for the practical implementation of risk management of road transportation of dangerous goods. This study has determined the environmental vulnerability of route BR 050, specifically the segment between the cities of Uberlândia and Uberaba in the state of Minas Gerais, where multi criteria analysis has been efficient in determining the most vulnerable areas. The main attributes analyzed were the drainage density, soil type and geology, determining that in case of an accident with dangerous substances the regional environment would be immediately affected, and so endorsing the use of this tool in many segments involved in environmental management of highway enterprises.     

A stochastic optimization approach for the selection of reflective cracking mitigation techniques

PurposeIn Hot Mix Asphalt (HMA) overlays, the existing cracks in the underlying pavements can propagate upward to the new added overlay and may cause Reflective Cracks (RC). These cracks allow water infiltration to the underlying layers and causes further moisture damage as well as weakening the unbound layers. Over the years, several methods have been developed for mitigating the RCs. This study aims to investigate the current reflective cracking mitigation methods and develop a methodology for the selection of appropriate mitigation technique. The developed model is then applied to a case study in the state of Florida.MethodTo accomplish this goal, a nationwide literature review was conducted to better understand the current in practice methods in the United States. Moreover, a life cycle cost analysis (LCCA) in five different road types was performed to find the annuity of roadway rehabilitation for each of the mitigation methods. The uncertainty in the LCCA results is represented using Exploratory Modeling and Analysis (EMA) method. Then through a Multi Criteria Decision Making (MCDM) model, a stochastic optimization model was developed to find the appropriate reflective cracking mitigation solution under Florida’s climate and road conditions, based on different cost and performance weights.ResultsBased on the available data for the state of Florida, the LCCA results indicate that the annuity of maintaining the roadway with Fabrics and ISAC are lower compared to other methods. However, the results of stochastic optimization model reveal that while looking at the performance and cost at the same time, different methods would be more feasible. For instance, while the cost of the used method does not matter at all and only performance matters, STRATA® is more probable to be the appropriate mitigation technique. The findings of this research are critical for decision makers to better understand the most cost-effective mitigation technique in different conditions.     

Multi‐objective highway alignment optimization using a genetic algorithm

The available highway alignment optimization algorithms use the total cost as the objective function. This is a single objective optimization process. In this process, travel‐time, vehicle operation accident earthwork land acquisition and pavement construction costs are the basic components of the total cost. This single objective highway alignment optimization process has limited capability in handling the cost components separately. Moreover, this process cannot yield a set of alternative solutions from a single run. This paper presents a multi‐objective approach to overcome these shortcomings. Some of the cost components of highway alignments are conflicting in nature. Minimizing some of them will yield a straighter alignment; whereas, minimizing others would make the alignment circuitous. Therefore, the goal of the multiobjective optimization approach is to handle the trade‐off amongst the highway alignment design objectives and present a set of near optimal solutions. The highway alignment objectives, i.e., cost functions, are not continuous in nature. Hence, a special genetic algorithm based multi‐objective optimization algorithm is suggested The proposed methodology is demonstrated via a case study at the end.     

神经网络在多目标分布式融合中的应用研究

提出了适合分布式多传感器多目标(MSMT)数据融合估计算法，对这种推广的分层融合估计算法进行了数学推导和描述，研究了利用神经网络进行MSMT跟踪融合的网络结构和算法，进行了计算机模拟仿真。仿真结果表明神经网络融合估计可提高跟踪精度，并且这种融合方法是有效的。     

一种复杂诊断系统的多智能体协同求解算法

为适应故障诊断中动态变化的环境和满足求解复杂系统全部任务的要求,研究一种基于MAS的分布式智能监控系统.以诊断决策问题的结构及建模过程的层次性为基本思想,基于诊断任务的多层次混合分解策略,提出了融合不同表达方式和推理机制的多Agent并行诊断结构,分析了管理Agent,诊断Agent和决策Agent的基本职能.探讨了实时Agent的组织和演化机制,给出了并行推理过程中的冲突消解算法,建立了具有公共属性的智能体模块化层次结构,实现了基于MAS多层分布式黑板模型的智能监控系统.工程应用效果验证了该求解的可行性和有效性.     

船舶多电系统变频器的应用

本文系统分析了船舶多电系统中变频器的优点，变频调速的工作原理、变频器的选型方法，船舶多电系统中变频器的节能。     

肩回交路条件下多机牵引机车周转图的优化

针对采用机车肩回交路的重载铁路线路,将其列车运行图中的列车运行线转化为节点,机车周转线转化为边,运用机车转化为流,从而将机车周转图的优化问题转化为网络流问题.在此基础上,以运用机车数最少、单机走行数最少、附挂机车数最少、机车在站停留时间最短和机车工作均衡性最好为优化目标,以网络流问题中的节点流量守恒和节点流量要满足节点需求为约束条件,建立肩回交路条件下的多机牵引机车周转图多目标优化模型.按照优化目标函数的优先级,采用分层序列法对模型求解,并利用C#语言编写程序,通过调用ILOG CPLEX优化软件实现了该算法.算例表明,采用所给模型和据此编制的机车周转图优化程序,可以快速优化肩回交路条件下的多机牵引机车周转图.     

Examining transport futures with scenario analysis and MCA

Climate change is a global problem and across the world the transport sector is finding it difficult to break projected increases in carbon dioxide (CO₂) emissions; there are very few contexts where deep reductions in transport CO₂ emissions are being made. A number of research studies are now examining the potential for future lower CO₂ emissions in the transport sector. This paper develops this work to consider some of the wider sustainability impacts (economic, social and local environmental) as well as the lower CO₂ transport impacts of different policy trajectories. Hence the central argument made is for an integrated approach to transport policy making over the longer term - incorporating scenario analysis and multi-criteria assessment (MCA) - to help assess likely progress against a range of objectives.The analysis is based on work carried out in Oxfordshire, UK. Different packages of measures are selected and two scenarios developed which satisfy lower CO₂ aspirations, one of which also provides wider positive sustainability impacts. A simulation model has been produced to help explore the strategic policy choices and tensions evident for decision-makers involved in local transport planning. The paper argues for a ‘strategic conversation’ (Van der Heijden, 1996) at the sub-regional and city level, based upon future scenario analysis and MCA, discussing the priorities for intervention. Such an approach will help us examine the scale of change and trade-offs required in moving towards sustainable transport futures.     

高职高专旅游管理专业多语教学研究

随着旅游业的发展,越来越需要高素质的旅游服务人才。为培养符合企业用人标准的高职高专毕业生,学校旅游管理专业的学生在学习英语的基础上,开设了二外——日语课程,探索"专业+1+1—"的人才培养模式。实践证明学生能够掌握第二外语,并能在就业后的岗位上实际应用,从而提高了就业竞争力。多语教学为高职高专学生的就业提供了更加广阔的平台。