首页 | 本学科首页   官方微博 | 高级检索  
     

珩磨角和粗糙度对CuNiCr气缸套摩擦学性能的影响
引用本文:陈文滨,马思齐,王正,徐久军. 珩磨角和粗糙度对CuNiCr气缸套摩擦学性能的影响[J]. 车用发动机, 2019, 0(3): 19-25
作者姓名:陈文滨  马思齐  王正  徐久军
作者单位:大连海事大学船机修造工程交通行业重点实验室,辽宁 大连,116026;大连海事大学船机修造工程交通行业重点实验室,辽宁 大连,116026;大连海事大学船机修造工程交通行业重点实验室,辽宁 大连,116026;大连海事大学船机修造工程交通行业重点实验室,辽宁 大连,116026
基金项目:辽宁省自然科学基金;中国博士后科学基金
摘    要:研究了不同珩磨形貌的CuNiCr气缸套与Cr-Al2O3涂层活塞环配副时的摩擦学性能。分析了CuNiCr气缸套磨损表面形貌和元素分布,以及珩磨角和粗糙度对缸套摩擦磨损和抗拉缸性能的影响规律。结果表明,优化珩磨角和粗糙度可以有效改善气缸套的摩擦学性能。珩磨角和粗糙度不仅影响活塞环与气缸套之间的磨损机制,而且还对润滑油膜分布和油膜的保持有较大影响,进而影响其摩擦磨损以及抗拉缸性能。

关 键 词:气缸套  珩磨  粗糙度  拉缸  摩擦学

Effects of Honing Angle and Roughness on Tribological Properties of CuNiCr Cylinder Liner
CHEN Wenbin,MA Siqi,WANG Zheng,XU Jiujun. Effects of Honing Angle and Roughness on Tribological Properties of CuNiCr Cylinder Liner[J]. Vehicle Engine, 2019, 0(3): 19-25
Authors:CHEN Wenbin  MA Siqi  WANG Zheng  XU Jiujun
Affiliation:(Key Lab of Ship-Maintenance & Manufacture,Dalian Maritime University,Dalian 116026,China)
Abstract:The tribological properties between the CuNiCr cylinder liner with different honing morphology and Cr-Al 2O3 coated piston ring were studied.The wear surface morphology and the chemical element distribution of the CuNiCr cylinder liner as well as the effects of honing angle and roughness on the friction and wear of cylinder liner and the cylinder anti-scuffing performance were analyzed.The results show that optimizing the honing angle and roughness can improve the tribological performance of cylinder liner effectively.The honing angle and roughness not only affect the wear mechanism between the piston ring and cylinder liner,but also have great influence on the distribution and maintenance of lubricating oil film,which affects its friction and wear and the cylinder anti-scuffing performance.
Keywords:cylinder liner  honing  roughness  cylinder scuffing  tribology
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号