首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于非结构网格的风压分配方法
引用本文:马文勇,李晓娜,孟丽军,马祥旺.基于非结构网格的风压分配方法[J].石家庄铁道大学学报(自然科学版),2014(4):9-12.
作者姓名:马文勇  李晓娜  孟丽军  马祥旺
作者单位:石家庄铁道大学风工程研究中心,河北石家庄050043
基金项目:国家自然科学基金(51108280);河北省自然科学基金(E2013210132)
摘    要:刚性模型测压风洞试验测试得到的测点风荷载一般无法直接用于结构抗风设计及风致响应计算。以结构表面风压测点作为控制点,通过多项式插值得到非结构网格并将测试得到的测点风荷载匹配至网格的节点和虚面上,以此作为计算分块风荷载、整体风荷载、节点风荷载及风致响应风荷载输入的依据。以某大跨度空间结构为例,说明了该方法的可行性、准确性和通用性。

关 键 词:风洞试验  测点风压  风荷载匹配  非结构化网格

New Principle Based on Unstructured Grid for Wind Pressure Distribution
Ma Wenyong,Li Xiaona,Meng Lijun,Ma Xiangwang.New Principle Based on Unstructured Grid for Wind Pressure Distribution[J].Journal of Shijiazhuang Railway Institute(Natural Science),2014(4):9-12.
Authors:Ma Wenyong  Li Xiaona  Meng Lijun  Ma Xiangwang
Institution:( Wind Engineering Research Center, Shijiazhuang Tiedao University, Shijiazhuang 050043, China)
Abstract:The tap’s wind pressure obtained by rigid model pressure test in wind tunnel is not directly used to wind-resistant design and wind induced response estimation. The wind loads on the grid-node and grid-sur-face, generated by matching the tap’s wind pressure with the unstructured-grid-node and unstructured-grid-node from the results of polynomial interpolation, are used to calculate the local wind loads, total wind loads, node wind forces and wind loads for estimating the responses. The feasibility, accuracy and generality of this method is proved in a case of a long-span structure.
Keywords:wind tunnel test  tap’s wind pressure  wind load distribution  unstructured grid
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号