首页 | 本学科首页   官方微博 | 高级检索  
     检索      


Clustering of heterogeneous networks with directional flows based on “Snake” similarities
Institution:1. COSYS-LICIT, IFSTTAR, ENTPE, Université de Lyon, France;2. Department of Transport and Planning, Faculty of Civil Engineering and Geosciences, Delft University of Technology, The Netherlands;1. Department of Transport and Planning, Faculty of Civil Engineering and Geosciences, Delft University of Technology, Delft 2600 GA, The Netherlands;2. Dynamic Systems and Simulation Laboratory, School of Production Engineering and Management, Technical University of Crete, Technical University Campus, Chania 73100, Greece;1. École Polytechnique Fédérale de Lausanne (EPFL), School of Architecture, Civil and Environmental Engineering (ENAC), Urban Transport Systems Laboratory (LUTS), Lausanne, Switzerland;2. Technion – Israel Institute of Technology, Faculty of Civil and Environmental Engineering, Technion Sustainable Mobility and Robust Transportation (T-SMART) Laboratory, Technion City, Rabin Building, Haifa 32000, Israel;1. Civil & Environmental Engineering Department, Michigan State University, USA;2. Urban Transport Systems Laboratory, École Polytechnique Fédérale de Lausanne (EPFL), Switzerland;3. School of Civil & Environmental Engineering, University of New South Wales, Australia;4. Northwestern University Transportation Center, USA
Abstract:Aggregated network level modeling and control of traffic in urban networks have recently gained a lot of interest due to unpredictability of travel behaviors and high complexity of physical modeling in microscopic level. Recent research has shown the existence of well-defined Macroscopic Fundamental Diagrams (MFDs) relating average flow and density in homogeneous networks. The concept of MFD allows to design real-time traffic control schemes specifically hierarchical perimeter control approaches to alleviate or postpone congestion. Considering the fact that congestion is spatially correlated in adjacent roads and it propagates spatiotemporaly with finite speed, describing the main pockets of congestion in a heterogeneous city with small number of clusters is conceivable. In this paper, we propose a three-step clustering algorithm to partition heterogeneous networks into connected homogeneous regions, which makes the application of perimeter control feasible. The advantages of the proposed method compared to the existing ones are the ability of finding directional congestion within a cluster, robustness with respect to parameters calibration, and its good performance for networks with low connectivity and missing data. Firstly, we start to find a connected homogeneous area around each road of the network in an iterative way (i.e. it forms a sequence of roads). Each sequence of roads, defined as ‘snake’, is built by starting from a single road and iteratively adding one adjacent road based on its similarity to join previously added roads in that sequence. Secondly, based on the obtained sequences from the first step, a similarity measure is defined between each pair of the roads in the network. The similarities are computed in a way that put more weight on neighboring roads and facilitate connectivity of the clusters. Finally, Symmetric Non-negative Matrix Factorization (SNMF) framework is utilized to assign roads to proper clusters with high intra-similarity and low inter-similarity. SNMF partitions the data by providing a lower rank approximation of the similarity matrix. The proposed clustering framework is applied in medium and large-size networks based on micro-simulation and empirical data from probe vehicles. In addition, the extension of the algorithm is proposed to deal with the networks with sparse measurements where information of some links is missing. The results show the effectiveness and robustness of the extended algorithm applied to simulated network under different penetration rates (percentage of links with data).
Keywords:
本文献已被 ScienceDirect 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号