| TBM刀盘的有限元参数化建模系统开发 |
| |
| 引用本文： | 潘伶伶,焦永树,蔡宗熙.TBM刀盘的有限元参数化建模系统开发[J].隧道建设,2015,35(4):382-386. |
| |
| 作者姓名： | 潘伶伶 焦永树 蔡宗熙 |
| |
| 作者单位： | （1.河北工业大学机械工程学院， 天津 300130; 2.天津大学力学系， 天津 300072） |
| |
| 基金项目： | 国家重点基础研究发展计划资助项目（2013CB035402） |
| |
| 摘 要： | 针对设计和研究人员快速构建TBM刀盘有限元模型的需求,采用APDL与VC++可视化编程技术相结合的方法,在编制刀盘建模APDL程序的基础上,开发友好的人机交互界面,实现了VC++与ANSYS之间的参数传递,建立了一套可视性良好的TBM刀盘有限元参数化建模系统。以某型号直径4 m TBM刀盘为例构建有限元模型,验证了该系统良好的实用性和可靠性。通过对此建模系统的开发,可实现TBM刀盘数字化建模、分析等全套设计。
|
| 关 键 词： | TBM刀盘 参数化建模 APDL 有限元 VC++ |
| 收稿时间： | 2014-12-22 |
Development of Finite Element Parametric Modeling System for TBM Cutter-head |
| |
| PAN Lingling,JIAO Yongshu,CAI Zongxi.Development of Finite Element Parametric Modeling System for TBM Cutter-head[J].Tunnel Construction,2015,35(4):382-386. |
| |
| Authors: | PAN Lingling JIAO Yongshu CAI Zongxi |
| |
| Institution: | (1. School of Mechanical Engineering, Hebei University of Technology, Tianjin 300130, China; 2. Department of Mechanics, Tianjin University, Tianjin 300072, China) |
| |
| Abstract: | In order to meet the requirement of rapid establishment of TBM cutter head finite element model, APDL and VC++ visible programming technology are used, some friendly interactive interfaces are developed, and a series of visualized finite element parametric modeling system is established, as a result, parameters can be transferred between VC++ and ANSYS. Furthermore, a finite element model is established for a 4 m diameter TBM cutter head, so as to verify the practicability and reliability of the system. The digitalized modeling, analyzing and design of TBM cutter head can be realized by using the mentioned system. |
| |
| Keywords: | TBM cutter head parametric modeling APDL finite element VC++ |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《隧道建设》浏览原始摘要信息 |
| 点击此处可从《隧道建设》下载免费的PDF全文 |
|
