| 旋转速度对复合搅拌摩擦点焊接头成形及抗剪力的影响 |
| |
| 引用本文： | 付娟,赵勇,严铿,蒋成禹.旋转速度对复合搅拌摩擦点焊接头成形及抗剪力的影响[J].江苏科技大学学报(社会科学版),2007,21(5):36-39. |
| |
| 作者姓名： | 付娟 赵勇 严铿 蒋成禹 |
| |
| 作者单位： | 江苏科技大学先进焊接技术省级重点实验室;江苏镇江; |
| |
| 基金项目： | 江苏省自然科学基金(BK2005055) |
| |
| 摘 要： | 采用复合搅拌摩擦点焊的方法对2mm LF21铝合金薄板进行焊接,测试了不同旋转速度下的焊接接头的抗剪力,并观察和分析了点焊接头的成形及微观组织。结果表明:当其他参数一定时,接头的抗剪力在旋转速度为1200 r/m in时达到最大值3.47 kN,同时得到表面光亮、成形美观的焊点;显微试验结果表明复合搅拌摩擦点焊接头塑性环区和热机械影响区均发生了强烈的金属塑性流动,其中塑性环区的晶粒尺寸细小、组织致密。
|
| 关 键 词： | 铝合金 复合搅拌摩擦点焊 旋转速度 抗剪力 |
| 文章编号： | 1673-4807(2007)05-0036-04 |
| 修稿时间： | 2007年5月18日 |
Influence of Rotary Speed on Formation and Shearing Resistance of Al-alloy Joint in Friction Stir Spot Welding with Com-stirTM |
| |
| FU Juan,ZHAO Yong,YAN Keng,JIANG Chengyu.Influence of Rotary Speed on Formation and Shearing Resistance of Al-alloy Joint in Friction Stir Spot Welding with Com-stirTM[J].Journal of Jiangsu University of Science and Technology:Natural Science Edition,2007,21(5):36-39. |
| |
| Authors: | FU Juan ZHAO Yong YAN Keng JIANG Chengyu |
| |
| Institution: | Provincial Key Lab of Advanced Welding Technology;Jiangsu University of Science and Technology;Zhenjiang Jiangsu 212003;China |
| |
| Abstract: | The friction stir spot welding with com-stirTM is adopted to make lap joints on the thin aluminum alloy board LF21 with a thickness of 2 mm.The shearing resistance was tested at different rotary speeds.The formation and the microstructure were observed and analyzed.Experimental results show that when the rotary speed reaches 1200 r/min,the maximum shearing resistance of the joint can be realized,about 3.47 kN,if other parameters remain constant.At the same time,the joint surface will be bright and beautiful... |
| |
| Keywords: | aluminum alloy com-stirTM friction stir spot welding rotary speed shearing resistance |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
