| TBM盘形滚刀受力分析 |
| |
| 引用本文： | 李辉,王树林,汪加科.TBM盘形滚刀受力分析[J].现代隧道技术,2012,49(3):193-197. |
| |
| 作者姓名： | 李辉 王树林 汪加科 |
| |
| 作者单位： | 江苏大学机械工程学院,镇江,212013 |
| |
| 摘 要： | 研究盘形滚刀的受力状况可以改善滚刀的设计,提高其使用寿命。文章通过ABAQUS分析软件建立了盘形滚刀切割岩石的有限元模型,并进行了动态模拟和动力学分析;模拟结果很好地解释了TBM掘进过程中,液压千斤顶需要不断地增加压力才能保持掘进速度的现象,并且验证了盘形滚刀最大瞬时接触力值为接触力平均值的2~3倍,同时发现ABAQUS可以很好地模拟出岩石被切割时出现岩碴飞溅的现象;研究结果为盾构机盘形滚刀刀具的设计及研究其寿命提供了一些理论依据。
|
| 关 键 词： | ABAQUS 盘形滚刀 全断面岩石掘进机 有限元模型 |
Force Analysis of the Disc Cutter on a TBM |
| |
| Li Hui
,
Wang Shulin
,
Wang Jiake.Force Analysis of the Disc Cutter on a TBM[J].Modern Tunnelling Technology,2012,49(3):193-197. |
| |
| Authors: | Li Hui Wang Shulin Wang Jiake |
| |
| Institution: | Li Hui Wang Shulin Wang Jiake(School of Mechanical Engineering,Jiangsu University,Zhenjiang 212013) |
| |
| Abstract: | Studying the force of disc cutters in the process of breaking rock can optimize the design and improve the life span of disc cutters.The finite element model of a disc cutter in the process of breaking rock was created by ABAQUS,and the model was dynamically simulated and analyzed.The results show that hydraulic jacks of a full face rock tunnel machine need to constantly increase pressure in order to maintain the excavation speed and the results that verify that the maximum instantaneous contact force is 2～3 times larger than the average contact force.Also,it was determined that ABAQUS can simulate the phenomenon of the ballast splashed out of the rock. |
| |
| Keywords: | ABAQUS Disc cutter Full face tunnel boring machine Finite element software |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
