首页 | 本学科首页   官方微博 | 高级检索  
     检索      

不同泊位长度对LNG船系泊的影响
引用本文:耿宝磊,李伟迁,李 焱,高 峰.不同泊位长度对LNG船系泊的影响[J].水运工程,2019(6):39-45.
作者姓名:耿宝磊  李伟迁  李 焱  高 峰
作者单位:交通运输部天津水运工程科学研究院港口水工建筑技术国家工程实验室&工程泥沙交通行业重点实验室;河海大学港口海岸与近海工程学院;天津大学建筑工程学院
基金项目:天津市应用基础与前沿技术研究计划项目(15JCQNJC07300);中央级科研院所基本科研业务费资助项目(TKS160107、TKS170217、TKS180402)
摘    要:通过1∶60的整体模型试验研究了不同泊位长度对17. 2万m~3LNG船系泊的影响,分析了船舶在风浪流联合作用下的运动量和缆绳张力变化情况。研究表明:横浪、横风、落潮流条件下,泊位长度缩短,艏、艉缆力分担了部分横缆力,对均衡艏、艉缆和横缆力有利,最大缆力变小;顺浪、顺风、落潮流条件下,泊位长度变化对系缆力影响不大;斜浪、横风、落潮流条件下,船舶受斜波作用,其纵横向均分配波浪力,倒缆与横缆或艏艉缆的受力基本相当;顺风时,倒缆力会大于横缆力和艏、艉缆力。该研究为天津LNG项目推荐了合适的泊位长度,可为码头工程设计提供参考。

关 键 词:LNG船  风浪流联合  泊位长度  系缆力

Effect of different berth lengths on LNG ship mooring
GENG Bao-lei,LI Wei-qian,LI Yan and GAO Feng.Effect of different berth lengths on LNG ship mooring[J].Port & Waterway Engineering,2019(6):39-45.
Authors:GENG Bao-lei  LI Wei-qian  LI Yan and GAO Feng
Institution:Tianjin Research Institute of Water Transport Engineering,National Engineering Laboratory for Port Hydraulic Construction Technology & Key Laboratory of Engineering Sediment of Ministry of Communications,Tianjin 300456,China,Tianjin Research Institute of Water Transport Engineering,National Engineering Laboratory for Port Hydraulic Construction Technology & Key Laboratory of Engineering Sediment of Ministry of Communications,Tianjin 300456,China;College of Harbor,Coastal and Offshore Engineering,Hohai University,Nanjing 210098,China,Tianjin Research Institute of Water Transport Engineering,National Engineering Laboratory for Port Hydraulic Construction Technology & Key Laboratory of Engineering Sediment of Ministry of Communications,Tianjin 300456,China;School of Architecture and Engineering,Tianjin University,Tianjin 300072,China and Tianjin Research Institute of Water Transport Engineering,National Engineering Laboratory for Port Hydraulic Construction Technology & Key Laboratory of Engineering Sediment of Ministry of Communications,Tianjin 300456,China;School of Architecture and Engineering,Tianjin University,Tianjin 300072,China
Abstract:The effect of different berth lengths on the mooring of 172,000 m3 LNG ship is studied by the 1:60 overall model test.The movement and cable tension of the ship under the combined action of wind,wave and flow are analyzed.The research shows that under the conditions of transverse wave,transverse wind and falling current,the length of berth is shortened,and the bow and stern cable force shares part of the transverse cable force,which is beneficial to the balanced bow and stern cable and transverse cable force,and the maximum cable forces become smaller;the change of berth length has little effect on mooring force under the conditions of downwave,downwind and falling current;under the condition of oblique wave,transverse wind and falling current,the ship is affected by oblique wave,and the wave force is distributed in both directions,and the force of spring cable is basically the same as that of transverse cable or bow and stern cable;when the wind is following,the spring force will be greater than the transverse force and the bow and stern force.The study recommends a suitable berth length for the Tianjin LNG project,which can provide reference for the design of the wharf.
Keywords:LNG boat  combination of wind and wave and current  berth length  mooring force
本文献已被 CNKI 等数据库收录!
点击此处可从《水运工程》浏览原始摘要信息
点击此处可从《水运工程》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号