首页 | 本学科首页   官方微博 | 高级检索  
     检索      

沥青路面现场压实质量评估标准探讨
引用本文:王东伟.沥青路面现场压实质量评估标准探讨[J].重庆交通大学学报(自然科学版),2009,28(2):268-272.
作者姓名:王东伟
作者单位:山西省交通科学研究院,山西,太原,030006
摘    要:沥青路面现场压实度或空隙率的大小直接影响到沥青路面的抗水损害能力。但对AC13、AC16、AC25三种级配类型各自50组级配的沥青混合料,在不同制样方式下的密度和空隙率研究结果表明,以现场芯样密度基于试验室标准密度获得的压实度或空隙率与沥青路面实际的压实度或空隙率存在2%的误差,导致沥青路面竣工压实质量的评定失真。因此,建议采用现场芯样密度以试验室标准密度评定沥青路面的现场压实度(或空隙率)时应考虑折减2%(或增加2%)作为竣工验收最终结果。

关 键 词:沥青路面  现场压实度  现场空隙率  现场芯样密度  试验室标准密度

Exploratory for In-Site Compression Evaluation Criterion of Asphalt Pavement
WANG Dong-wei.Exploratory for In-Site Compression Evaluation Criterion of Asphalt Pavement[J].Journal of Chongqing Jiaotong University,2009,28(2):268-272.
Authors:WANG Dong-wei
Institution:Shanxi Communications Science Research & Design Institute;Shanxi Taiyuan 030006;China
Abstract:The in-site degree of compaction or voids for asphalt pavement directly influences the water failure resistance to asphalt pavement.But the research results for the density and the voids of asphalt mixtures with each a 50 groups of grade for AC13,AC16 and AC25 respectively at different experiment ways show that the in-site degree of compaction or voids based on the bore-in-site sample density to laboratory criterion density has an error of 2% with the actual in-site degree of compaction or voids of asphalt ...
Keywords:asphalt pavement  in-site degree of compaction  in-site void  bore-in-site sample density  laboratory criterion density  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号