| 铁路货车车体用TCS铁素体不锈钢焊接性能研究 |
| |
| 引用本文： | 丁韦,宋宏图,黄辰奎,张斌.铁路货车车体用TCS铁素体不锈钢焊接性能研究[J].铁道机车车辆,2006,26(5):28-29. |
| |
| 作者姓名： | 丁韦 宋宏图 黄辰奎 张斌 |
| |
| 作者单位： | 铁道科学研究院,金属及化学研究所,北京,100081 |
| |
| 摘 要： | 铁素体不锈钢在国外已大量应用于铁路车辆。我国研制的TCS铁素体不锈钢母材力学性能良好。焊接接头的热影响区硬度没有明显下降,焊接接头整体的抗拉强度高于母材。经过焊接热循环,焊接热影响区存在0.5~0.7 mm的粗晶粒区,晶粒度只有1~3级。这一区域的低温韧性较低。
|
| 关 键 词： | 铁路货车车体 铁素体不锈钢 焊接性 |
| 文章编号： | 1008-7842（2006）05-0028-02 |
| 收稿时间： | 2006-04-24 |
| 修稿时间： | 2006年4月24日 |
Study of the Welding Performance of TCS Ferritic Stainless Steel Used on Railway Vehicle |
| |
| DING Wei,SONG Hong-tu,HUANG Chen-kui,ZHANG Bin.Study of the Welding Performance of TCS Ferritic Stainless Steel Used on Railway Vehicle[J].Railway Locomotive & Car,2006,26(5):28-29. |
| |
| Authors: | DING Wei SONG Hong-tu HUANG Chen-kui ZHANG Bin |
| |
| Institution: | Metals and Chemistry Research Institute, China Academy of Railway Sciences, Beijing 100081, China |
| |
| Abstract: | Ferritic Stainless Steel has been broadly used on manufacture of Railway Vehicle.h had a good mechanical property. As far as its welding performance is concerned, its HAZ hardness of weld joint has no distinct decrease, tensile strength of weld joint is better than base metal. After welding thermal cycle, a coarse grain zone which is 0.5 - 0.7mm width arise at HAZ of weld joint, its grain size is between one and three grade, which makes the low - temperature flexibility of that zone is a little lower. |
| |
| Keywords: | railway vehicle body ferritic stainless steel weld ability |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
