首页 | 本学科首页   官方微博 | 高级检索  
     检索      

节段预制胶拼构件胶接缝厚度研究
引用本文:卢文良,马晓蕾,郑强.节段预制胶拼构件胶接缝厚度研究[J].铁道建筑,2019(8):39-41.
作者姓名:卢文良  马晓蕾  郑强
作者单位:北京交通大学土木建筑工程学院
基金项目:中国铁路总公司科技研究开发计划(2016G002-H)
摘    要:拼接胶是节段预制拼装桥梁的重要建筑材料,胶接缝厚度对桥梁受力性能和耐久性能有重要影响。本文设计了胶接缝厚度试验构件,从11个构件中取样实测并统计分析了胶接缝厚度。结果表明:胶缝厚度基本服从正态分布,拟合得出胶接缝厚度均值为0. 48 mm,标准差为0. 23 mm。分析了预制节段端面表层剥落、挤胶应力不均匀及节段拼装误差对胶接缝厚度的影响,探讨了胶接缝厚度对节段混凝土受力状态的影响,即过厚的胶层将引起拼装桥梁整体刚度降低及预应力损失增大。

关 键 词:桥梁  节段预制  统计分析  胶接缝  挤胶工艺  临时预应力

Research on Epoxy Joint Thickness for Precast Segmental Members
LU Wenliang,MA Xiaolei,ZHENG Qiang.Research on Epoxy Joint Thickness for Precast Segmental Members[J].Railway Engineering,2019(8):39-41.
Authors:LU Wenliang  MA Xiaolei  ZHENG Qiang
Institution:(School of Civil Engineering,Beijing Jiaotong University,Beijing 100044,China)
Abstract:Epoxy resin adhesive is an important building material for precast segmental assembled bridges.The epoxy joint thickness has an important inf luence on the mechanical properties and durability of the bridge.The testing members of epoxy joint thickness were designed in this paper.The epoxy joint thickness was measured and analyzed statistically from eleven members,which obeys the normal distribution.The f itting result shows that the average thickness of epoxy joint is 0.48 mm and the standard deviation is 0.23 mm.The inf luences of surface peeling off of prefabricated segment end section,uneven stress of extrusion epoxy and assembling error of segment on the epoxy joint thickness were analyzed.The inf luence of epoxy joint thickness on the stress state of segment concrete was discussed.Over-thick epoxy layer will cause overall stiffness reduction and prestress loss of assembled bridges.
Keywords:Bridge  Precast segment  Statistical analysis  Epoxy joint  Technology of extruding epoxy  Temporary prestress
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号