| 高速公路护栏系统的有限元优化分析 |
| |
| 引用本文： | 舒翔,张晓晴,黄小清,汤立群.高速公路护栏系统的有限元优化分析[J].公路交通科技,2006,23(5):121-125. |
| |
| 作者姓名： | 舒翔 张晓晴 黄小清 汤立群 |
| |
| 作者单位： | 广东河惠高速公路公司 广东惠州510600(舒翔)，华南理工大学交通学院 广东广州510640(张晓晴，黄小清，汤立群) |
| |
| 基金项目： | 广东省交通科技项目(粤交科函[1999]40) |
| |
| 摘 要： | 首先对高速公路护栏系统进行了单部件的有限元优化分析,即通过对护栏系统主要的单个部件分别进行优化设计,以考察护栏系统在这些优化条件下的安全防护有效性和能量吸收特性。然后对高速公路护栏系统进行了多部件有限元优化分析,即在对单个部件优化的基础上,提出多部件复合优化分析方案。结果表明,分别增加或同时增加波形梁和防阻块的厚度为较优的方案,并据此提出一些建议,供工程设计参考。
|
| 关 键 词： | 护栏系统 优化设计 有限元分析 |
| 收稿时间： | 2005-09-09 |
Finite Element Analysis on Optimum Design of Expressway Guardrail System |
| |
| SHU Xiang, ZHANG Xiao-qing, HUANG Xiao-qing, TANG Li-qun.Finite Element Analysis on Optimum Design of Expressway Guardrail System[J].Journal of Highway and Transportation Research and Development,2006,23(5):121-125. |
| |
| Authors: | SHU Xiang ZHANG Xiao-qing HUANG Xiao-qing TANG Li-qun |
| |
| Institution: | 1.Guangdong Hehui Freeway Co.LTD, Guangdong Huizhou 510600, China; 2.College of Traffic and Communieations, South China University of Technology, Guangdong Guaagzhou 510640, China |
| |
| Abstract: | Finite element analysis was used for single component optimization design of expressway guardrail system for studying the effectiveness and energy absorbing property of the key component,then using finite element analysis on multiple components optimum design of expressway guardrail system,optimum plan for multiple components is presented.It is shown that increasing the thickness of w-beams and blocks separately or simultaneously is more reasonable for the design of expressway guardrail system.Accordingly some practical and effective suggestions are given for the engineering design. |
| |
| Keywords: | W-beam guardrail system Optimum design Finite element analysis |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
