| 基于CAN/LIN总线的车门控制系统开发 |
| |
| 引用本文： | 王旭芳,郑太雄,程安宇,罗洪平,赵双.基于CAN/LIN总线的车门控制系统开发[J].汽车技术,2008(1):42-46. |
| |
| 作者姓名： | 王旭芳 郑太雄 程安宇 罗洪平 赵双 |
| |
| 作者单位： | 重庆邮电大学 |
| |
| 基金项目： | 国家高技术研究发展计划(863计划)
,
重庆市信息产业发展基金
,
重庆市科委资助项目 |
| |
| 摘 要： | 在分析CAN/LIN总线技术特点的基础上,分别选用MC68HC908GZ32和MC68HC908QL4单片机设计开发了某车型车门控制系统的CAN/LIN网关节点和LIN的硬件模块,并根据控制功能要求开发了控制软件,实现了电动车窗自动/手动升降和电动后视镜调节控制.最后将各模块安装在车门上进行了调试,测试结果表明,所设计模块运行稳定、性能可靠,达到了预定要求.
|
| 关 键 词： | 车门控制系统 CAN/LIN总线 网关节点 |
| 文章编号： | 1000-3703（2008）01-0042-04 |
| 收稿时间： | 2007-08-31 |
Research and Development of Automotive Door Control System Based on CAN/LIN Bus |
| |
| Wang Xufang,Zheng Taixiong,Cheng Anyu,Luo Hongping,Zhao Shuang.Research and Development of Automotive Door Control System Based on CAN/LIN Bus[J].Automobile Technology,2008(1):42-46. |
| |
| Authors: | Wang Xufang Zheng Taixiong Cheng Anyu Luo Hongping Zhao Shuang |
| |
| Abstract: | Based on the analysis of technical features of CAN/LIN bus,the CAN/LIN gateway node and LIN hardware module of one certain vehicle door control system are designed by using the single chip machine MC68HC908GZ32 and MC68HC908QIA respectively,the control software is developed according to the control requirement,and the control of electronic windows and rearview mirrors is realized.Finally,the door module is installed and tested in real vehicle,the results of test show that the performance of module is steady and reliable, and the requirement of design is achieved. |
| |
| Keywords: | Automotive door control system CAN/LIN Bus Gateway node |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
