| 润滑脂对100C6碳钢微动磨损的影响 |
| |
| 引用本文： | 刘启跃,周仲荣.润滑脂对100C6碳钢微动磨损的影响[J].西南交通大学学报,1998,33(2):170-173. |
| |
| 作者姓名： | 刘启跃 周仲荣 |
| |
| 作者单位： | 西南交通大学机械工程学院 |
| |
| 基金项目： | 国家教育委员会资助优秀拔尖留学回国人员科研重点基金项目 |
| |
| 摘 要： | 对１００Ｃ６碳钢在润滑脂工况和干态工况下进行了试验研究。分析了润滑脂对微动磨损的影响机理，阐述了润滑脂介质作用的微动破坏过程。发现在润滑脂作用下，微动磨损过程与干态下不完全相同，其三体作用功能不如干态明显。
|
| 关 键 词： | 磨损 润滑脂 摩擦副 微动 碳钢 |
Effect of Grease Lubricants on Fretting of 100C6 Steel |
| |
| Liu,Qiyue,Zhou,Zhongrong,Wang,Xiaqiu.Effect of Grease Lubricants on Fretting of 100C6 Steel[J].Journal of Southwest Jiaotong University,1998,33(2):170-173. |
| |
| Authors: | Liu Qiyue Zhou Zhongrong Wang Xiaqiu |
| |
| Abstract: | Fretting experiments are carried out on 100c6 steel under dry and grease lubricated conditions. The mechanics of wears by fretting under the grease lubricated condition is analyzed. The results indicate that for the same wear of 100c6 steel by fretting, the cycles under grease lubricated condition is over 10 times greater than those under dry condition. The fretting process under grease lubricated condition is not the same as that under dry condition, and the effect of the third body under the former condition is not as obvious as that under the latter condition. |
| |
| Keywords: | wear grease friction pair fretting |
| 本文献已被 CNKI 维普 等数据库收录！ |
