| 16PA6STCV280柴油机配气机构虚拟样机技术研究 |
| |
| 引用本文： | 姚寿广,许江涛,段巧玉.16PA6STCV280柴油机配气机构虚拟样机技术研究[J].江苏科技大学学报(社会科学版),2009,23(2):129-132. |
| |
| 作者姓名： | 姚寿广 许江涛 段巧玉 |
| |
| 作者单位： | 江苏科技大学,机械工程学院,江苏,镇江,212003
|
| |
| 摘 要： | 为研究16PA6STCV280柴油机配气机构系统动态特性,采用Pro/E软件建立了柴油机配气机构的三维实体模型,通过ADAMS软件与Pro/E软件的接口M echan ism/Pro模块,将三维实体模型导入到ADAMS软件中,建立了16PA6STCV280柴油机配气机构虚拟样机,在此基础上对该机配气机构进行了运动仿真分析,得到了进、排气阀等关键部件的位移、速度、加速度以及受力等运动学和力学参数,为进一步有限元结构分析以及系统优化提供了基础.
|
| 关 键 词： | 柴油机 配气机构 虚拟样机技术 ADAMS |
Research on virtual prototype technology of 16PA6STCV280 diesel valve train system |
| |
| Yao Shouguang,Xu Jiangtao,Duan Qiaoyu.Research on virtual prototype technology of 16PA6STCV280 diesel valve train system[J].Journal of Jiangsu University of Science and Technology:Natural Science Edition,2009,23(2):129-132. |
| |
| Authors: | Yao Shouguang Xu Jiangtao Duan Qiaoyu |
| |
| Institution: | School of Mechanical Engineering;Jiangsu University of Science and Technology;Zhenjiang Jiangsu 212003;China |
| |
| Abstract: | In order to study the dynamic characteristics of 16PA6STCV280 diesel engine valve train system,this paper used Pro/Engineer software to establish 3D model of gas engine,by the interface Mechanism/Pro module of the ADAMS software and Pro/Engineering software,the 3D model could be imported into ADAMS.Virtual Prototype of 16PA6STCV280 diesel engine valve train system was established.The displacement,speed,acceleration and force,and other parameters of kinematics and mechanics were gotten by the motion simulati... |
| |
| Keywords: | ADAMS |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
