Finite element study on circular armour wire lateral buckling in umbilicals

The present paper addresses the circular armour wire lateral buckling in umbilicals. An asymmetric non-linear finite element model is developed to analyze a single armour wire subjected to combined constant axial compression and uniform cyclic curvatures. A parametric case study is performed for an armour wire from a nine-hose umbilical cable, where the armour wire pitch number, applied axial compressive load and minimum and maximum curvatures in the applied cyclic bending are varied. The armour wire end shortenings, transverse sliding in cyclic bending, the buckling shapes and equilibrium paths after numerous bending cycles, the critical buckling loads, the stress states at the onset of lateral buckling, and the required number of bending cycles that triggers lateral buckling are obtained and extensively discussed. The critical buckling loads given by the FE model have been compared with an existing analytical formulation, indicating that the analytical model is reliable for small cyclic curvatures. Moreover, an empirical model is proposed for the required number of bending cycles to trigger the lateral buckling and good correlation with the FE results has been observed.