首页 | 本学科首页   官方微博 | 高级检索  
     检索      

舰船甲板变形的理论研究
引用本文:郑荣才,陈超英,杨功流.舰船甲板变形的理论研究[J].舰船科学技术,2006,28(4):18-21.
作者姓名:郑荣才  陈超英  杨功流
作者单位:1. 天津大学,机械工程学院,天津,300072;军事交通学院,天津,300161
2. 天津大学,机械工程学院,天津,300072;中国船舶重工集团公司第七○七研究所,天津,300131
基金项目:国防十五预研项目(1010605020201)
摘    要:为了研究舰船甲板的变形,对其结构进行了简化,建立了舰船甲板受力的数学模型。分别在横向载荷、总纵弯矩及二者共同作用等3种情形下,对舰船甲板的变形特性进行了计算。计算结果表明,舰船甲板受力变形为mm级;在横向载荷作用下,舰首甲板变形最大;在总纵弯矩作用下,甲板的0.6~0.75间部位变形最大。

关 键 词:舰船  甲板变形  横向载荷  总纵弯矩
文章编号:1672-7649(2006)04-0018-04
收稿时间:2005-07-15
修稿时间:2005-07-15

Theoretical analysis on deck deformation of ship
ZHENG Rong-cai,CHEN Chao-ying,YANG Gong-liu.Theoretical analysis on deck deformation of ship[J].Ship Science and Technology,2006,28(4):18-21.
Authors:ZHENG Rong-cai  CHEN Chao-ying  YANG Gong-liu
Institution:1. School of Mechanical Engineering, Tianjin University, Tianjin 300072, China; 2. The 707 Research Institute of CSIC, Tianjin 300131 ,China; 3. Military Traffic Institute, Tianjin 300161 ,China
Abstract:The structure of deck was simplified to analyze the deck deformation. Then the mathematic model of deck under forces was developed. The deck deformation was numerically analyzed under the influence of transverse load, longitudinal bending moment and both of them. The results show that the deck deformation is millimeter grade. The transverse load can result in maximum deformation in the bow deck. The deck between the 0.6 -0.8 longth has maximum deformation under longitudinal bending moment.
Keywords:ship  deck deformation  transverse load  longitudinal bending moment
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号