| 焊接速度对AH36船用高强钢焊接残余应力及其释放的影响 |
| |
| 引用本文： | 罗广恩,沈言,郑远昊.焊接速度对AH36船用高强钢焊接残余应力及其释放的影响[J].船舶工程,2019,41(9):104-110. |
| |
| 作者姓名： | 罗广恩 沈言 郑远昊 |
| |
| 作者单位： | 江苏科技大学船舶与海洋工程学院,江苏镇江,212003;江苏科技大学船舶与海洋工程学院,江苏镇江,212003;江苏科技大学船舶与海洋工程学院,江苏镇江,212003 |
| |
| 基金项目： | 江苏省自然科学基金(BK20150468)；国家自然科学(51479084)。 |
| |
| 摘 要： | 焊接件由于焊接速度不同,焊接残余应力分布存在很大差异,焊接残余应力在循环载荷作用下会产生释放现象,焊接残余应力存在对于结构安全性和稳定性有很大影响,有必要开展焊接速度对于焊接残余应力及其释放影响研究。基于ABAQUS软件二次开发建立平板对接焊试件焊接残余应力以及释放有限元模型,利用顺序耦合热力学数值仿真计算三种焊接速度下的焊接残余应力分布,并开展三种焊接速度下初始焊接残余应力在三种拉伸循环载荷作用下的释放情况研究。
|
| 关 键 词： | 焊接残余应力释放 数值仿真 焊接速度 拉伸循环载荷 |
| 收稿时间： | 2018/11/7 0:00:00 |
| 修稿时间： | 2019/10/24 0:00:00 |
Study on Influence of Welding Speed on Welding Residual Stress and Release of AH36 Marine High Strength Steel |
| |
| Luo Guang-en,and Zheng Yuan-hao.Study on Influence of Welding Speed on Welding Residual Stress and Release of AH36 Marine High Strength Steel[J].Ship Engineering,2019,41(9):104-110. |
| |
| Authors: | Luo Guang-en and Zheng Yuan-hao |
| |
| Institution: | School of Naval Architecture and Ocean Engineering,Jiangsu University of Science and Technology,Zhenjiang Jiangsu,School of Naval Architecture and Ocean Engineering,Jiangsu University of Science and Technology,Zhenjiang Jiangsu 212003;China,School of Naval Architecture and Ocean Engineering,Jiangsu University of Science and Technology,Zhenjiang Jiangsu |
| |
| Abstract: | Due to the different welding speeds, the welding residual stress distribution is very different. The welding residual stress will release under the cyclic load. The welding residual stress has great influence on the structural safety and stability, so it is necessary to carry out research on the influence of welding speed on welding residual stress and its release. Based on the secondary development of ABAQUS software, the welding residual stress and release finite element model of flat butt welding specimens were established. The sequential coupled thermo-dynamic numerical simulation method was used to calculate the welding residual stress distribution under three welding speeds, the release of initial welding residual stress at three welding speeds under three tensile cyclic loads was studied. |
| |
| Keywords: | Welding residual stress release numerical simulation welding speed tensile cyclic load |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《船舶工程》浏览原始摘要信息 |
| 点击此处可从《船舶工程》下载免费的PDF全文 |
|
