首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于后氧传感器信号的催化器诊断方法应用
引用本文:邹洪波,杨志强,孙雄,冯彧.基于后氧传感器信号的催化器诊断方法应用[J].车用发动机,2015(4):89-92.
作者姓名:邹洪波  杨志强  孙雄  冯彧
作者单位:泛亚汽车技术中心有限公司 ,上海,201201
摘    要:在一搭载1.4L自然吸气汽油发动机且满足国Ⅴ排放法规的汽车上,开展了基于后氧传感器信号的三效催化转化器诊断方法应用研究。试验结果表明:随着三效催化转化器储氧能力的下降,后氧传感器信号的振动频率及幅值增大;三效催化转化器储氧能力损失平均值及标准偏差随着高通滤波截止频率的减小而增大,最优截止频率为0.2;通过合理优化各诊断参数,该诊断方法能有效地监测出三效催化转化器的失效。

关 键 词:催化器储氧能力  后氧传感器信号  高通滤波  催化器诊断

Application of Catalyst Diagnostic Method Based on Rear Oxygen Sensor Signal
Abstract:On a vehicle with 1 .4 L naturally aspirated and China Ⅴ gasoline engine ,the application of three-way catalyst diag-nostic method based on the rear oxygen sensor signal was researched .The experimental results show that the oscillation fre-quency and amplitude of rear oxygen sensor signal increase with the decrease of oxygen storage capacity of catalyst .The aver-age and standard deviation of oxygen storage capacity loss increase with the decrease of the cutoff frequency of high-pass filte-ring and the optimal cutoff frequency is 0 .2 .The catalyst diagnostic method can finally detect the failure of three-way catalyst by optimizing all diagnostic parameters .
Keywords:oxygen storage capacity of catalyst  rear oxygen sensor signal  high-pass filtering  catalyst diagnosis
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号