首页 | 本学科首页   官方微博 | 高级检索  
     检索      

钒微合金化中碳钢微观组织及力学性能的对比研究
引用本文:吴毅,项彬,孙跃,刘鑫贵,宋子濂,许亚娟.钒微合金化中碳钢微观组织及力学性能的对比研究[J].铁道机车车辆,2010,30(3):48-51.
作者姓名:吴毅  项彬  孙跃  刘鑫贵  宋子濂  许亚娟
作者单位:1. 哈尔滨工业大学,黑龙江哈尔滨,150001
2. 中国铁道科学研究院,金属及化学研究所,北京,100081
摘    要:通过金相分析、SEM(扫描电子显微镜)、TEM(透射电子显微镜)观察和X射线衍射相结合的方法对比分析了添加钒微合金化元素前后中碳钢显微组织和力学性能的变化情况。研究结果表明:钒微合金化中碳钢综合力学性能改善效果显著,细晶强化是其最主要的强韧化方式;在渗碳体片层间的铁素体上分布有大小约为几十到一百纳米左右的析出物,主要为VC(碳化钒)和AlN(氮化铝),渗碳体片层出现了碎化,这也在一定程度上改善了微合金化中碳钢的强韧性。

关 键 词:钒微合金化  中碳钢  强韧性  析出物

Comparative Study of Microstructure and Mechanical Properties in V Micro-alloyed Medium Carbon Steels
WU Yi,XIANG Bin,SUN Yue,LIU Xin-gui,SONG Zi-lian,XU Ya-juan.Comparative Study of Microstructure and Mechanical Properties in V Micro-alloyed Medium Carbon Steels[J].Railway Locomotive & Car,2010,30(3):48-51.
Authors:WU Yi  XIANG Bin  SUN Yue  LIU Xin-gui  SONG Zi-lian  XU Ya-juan
Institution:1 Harbin Institute of Technology,Harbin 150001 Heilongjiang,China;2 Metal and Chemistry Research Institute,China Academy of Railway Science,Beijing 100081,China)
Abstract:The methods of metallographic analysis,SEM,TEM and X-ray diffraction were used to analysis the changes of microstructure and mechanical properties by adding vanadium micro-alloyed elements in medium carbon steels.The results show the mechanical properties of vanadium micro-alloyed medium carbon steels improved significantly,the most important approach of toughening is fine-grain strengthening;the mainly precipitates VC and AlN which about 10 to 100 nm or so,are located in the ferrite that between cementite lamellae,and the cementite lamellae become fragmentation,these may also to some extent have improved the strength and toughness in the micro-alloyed steels.
Keywords:vanadium micro-alloyed  medium-carbon steels  strength and toughness  precipitates
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号