Isrss: Integrated side/rear safety system

As driver assistant systems (DAS) and active safety vehicles (ASV) with various functions become popular, it is not uncommon for multiple systems to be installed on a vehicle. If each function uses its own sensors and processing unit, it will make installation difficult and raise the cost of the vehicle. As a countermeasure, research integrating multiple functions into a single system has been pursued and is expected to make installation easier, decrease power consumption, and reduce vehicle pricing. This paper proposes a novel side/rear safety system using only one scanning laser radar, which is installed in the rear corner of the driver’s side. Our proposed system, ISRSS (integrated side/rear safety system), integrates and implements four system functions: BSD (blind spot detection), RCWS (rear collision warning system), semi-automatic perpendicular parking, and semi-automatic parallel parking. BSD and RCWS, which operate while the vehicle is running, share a common signal processing result. The target position designation for perpendicular parking and parallel parking situations is based on the same signal processing. Furthermore, as system functions during running and those during automatic parking operate in exclusive situations, they can share common sensors and processing units efficiently. BSD and RCWS system functions were proved with 13025 and 2319 frames, respectively. The target position designation for perpendicular and parallel parking situations was evaluated with 112 and 52 situations and shows a success rate of 98.2% and 92.3%, respectively.