首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于Drucker-Prager系列准则的边坡安全系数计算方法
引用本文:熊欢,肖盛燮.基于Drucker-Prager系列准则的边坡安全系数计算方法[J].重庆交通大学学报(自然科学版),2010,29(4):582-586.
作者姓名:熊欢  肖盛燮
作者单位:重庆交通大学,土木建筑学院,重庆,400074;重庆交通大学,土木建筑学院,重庆,400074
基金项目:国家自然科学基金资助项目 
摘    要:探讨了基于DP(Drucker-Prager)准则的边坡安全系数的计算方法。ANSYS有限元软件采用的岩土材料屈服准则为莫尔-库仑六边形外接圆DP准则,对均质边坡,可先求出外接圆DP准则条件下的安全系数,然后利用安全系数转换公式计算出各DP准则条件下的安全系数。对于具有多层土体的边坡,先通过调整各层土体的c,φ值,以实现DP系列准则间的相互转换,再计算得到各DP准则条件下的安全系数。通过算例验证了所提出的方法的可行性。

关 键 词:有限元强度折减法  边坡安全系数  屈服准则

Calculation Method of Slope Stability Safety Factor Based on the Drucker-Prager Criterion
XIONG Huan,XIAO Sheng-xie.Calculation Method of Slope Stability Safety Factor Based on the Drucker-Prager Criterion[J].Journal of Chongqing Jiaotong University,2010,29(4):582-586.
Authors:XIONG Huan  XIAO Sheng-xie
Institution:XIONG Huan,XIAO Sheng-xie (School of Civil Engineering & Architecture,Chongqing Jiaotong University,Chongqing 400074,China)
Abstract:Calculation method of slope stability safety factor was proposed based on the Drucker-Prager criterion.Currently,the Mohr-Coulomb hexagon circumcircle Drucker-Prager criterion was adopted in the ANSYS program.For homogeneous slope,the safety factor with the Mohr-Coulomb hexagon circumcircle Drucker-Prager criterion was calculated by using ANSYS,therefore the safety factor could be obtained with the deduced conversion formulae based on the Drucker-Prager yield criterion.For the slope with multi-layer,the tra...
Keywords:strength reduction of FEM  slope safety  yield criterion  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号