| FPGA在三相PWM逆变器死区补偿中的应用 |
| |
| 引用本文： | 曲红,林争辉.FPGA在三相PWM逆变器死区补偿中的应用[J].机车电传动,2004(6):35-37. |
| |
| 作者姓名： | 曲红 林争辉 |
| |
| 作者单位： | 同济大学,电子科学系,上海,200092;同济大学,电子科学系,上海,200092 |
| |
| 摘 要： | 为避免三相PWM逆变器中上下桥臂开关管发生直通短路故障，设置了死区。但死区使逆变器输出的电压基波幅值减小、谐波增加、调制频率受限制，尤其使电机的低速运行性能变差，必须对其进行补偿。在电流反馈补偿的原理基础上，应用FPGA借助VHDL语言编写的设计软件，对死区进行补偿，得到了很好的效果。
|
| 关 键 词： | 三相逆变器 死区补偿 电流反馈 |
| 文章编号： | 1000-128X(2004)06-0035-03 |
| 修稿时间： | 2004年3月30日 |
Application of FPGA to dead band compensation of three-phase PWM inverter |
| |
| QU Hong,LIN Zheng-huiSchool of Electronic Technology,Tongji University,Shanghai ,China.Application of FPGA to dead band compensation of three-phase PWM inverter[J].Electric Drive For Locomotive,2004(6):35-37. |
| |
| Authors: | QU Hong LIN Zheng-huiSchool of Electronic Technology Tongji University Shanghai China |
| |
| Institution: | QU Hong,LIN Zheng-huiSchool of Electronic Technology,Tongji University,Shanghai 200092,China |
| |
| Abstract: | In three-phase inverter, dead band is set to avoid direct through short circuit of switch diodes in upper and lower bridges. Anyhow, dead band reduces the output fundamental voltage amplitude, increases harmonic, limits modulation frequency, and even more worsens the motor's performance in low velocity. So the compensation is necessary. On the basis of current feedback compensation principle, the dead band is compensated by design software programmed by VHDL language in use of FPGA, with high efficiency. |
| |
| Keywords: | 3-phase inverter dead band compensation current feedback |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
