| 轮轨接触关系计算方法 |
| |
| 引用本文： | 倪平涛,王开文,张卫华,池茂儒.轮轨接触关系计算方法[J].交通运输工程学报,2006,6(4):10-13. |
| |
| 作者姓名： | 倪平涛 王开文 张卫华 池茂儒 |
| |
| 作者单位： | 西南交通大学,牵引动力国家重点实验室,四川,成都,610031 |
| |
| 基金项目： | 教育部高等学校博士学科点专项科研基金;国家创新优秀群体基金 |
| |
| 摘 要： | 为了在车辆-轨道耦合动力学仿真中能更真实反映轮轨接触状态,利用迹线法原理和轨廓分区法,在考虑轮对的横移、浮沉、摇头、侧滚和左右钢轨的横移、浮沉、侧滚的条件下,分别计算轨顶和轨侧区域与车轮的最小轮轨间隙量,以此来判断轮轨的真实接触状态:正常的一点接触、非正常的一点接触、两点接触和车轮完全悬浮,并根据非线性赫兹接触理论分别求得两接触点处的轮轨法向力。轮轨接触关系仿真结果表明根据轮轨接触关系计算方法得出的轮轨接触关系符合车辆在实际线路上的运行状态。
|
| 关 键 词： | 车辆工程 轮轨接触 轨廓分区 全面计算 轮轨法向力 |
| 文章编号： | 1671-1637(2006)04-0010-04 |
| 收稿时间： | 2006-06-25 |
| 修稿时间： | 2006年6月25日 |
Calculation method of wheel-rail contact relation |
| |
| Ni Ping-tao,Wang Kai-wen,Zhang Wei-hua,Chi Mao-ru.Calculation method of wheel-rail contact relation[J].Journal of Traffic and Transportation Engineering,2006,6(4):10-13. |
| |
| Authors: | Ni Ping-tao Wang Kai-wen Zhang Wei-hua Chi Mao-ru |
| |
| Institution: | Traction Power State Key Laboratory, Southwest Jiaotong University, Chengdu 610031, Sichuan, China |
| |
| Abstract: | In order to reflect really wheel-rail contact states,the displacement,bouncing,yaw,roll of wheelsets and the displacement,bouncing,roll of rails were considered,wheel-rail normal forces at two contact points were respectively calculated by nonlinear Hertz contact theory,the minimum gap between rail and wheel was calculated by trochoid method and divided rail outline method,so that wheel-rail real contact states,such as natural one-point contact,nonnatural one-point contact,two-point contact and wheel complete lift,were easily judged.Simulation result of wheel-rail contact relation shows that judged wheel-rail relation accords with real wheel-rail contact relation,the method is feasible.2 tabs,4 figs,11 refs. |
| |
| Keywords: | vehicle engineering wheel-rail contact divided rail outline total calculation wheel-rail normal force |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
