首页 | 本学科首页   官方微博 | 高级检索  
     检索      

车联网中驾驶员反应时间实时估计方法
引用本文:柴琳果,蔡伯根,王化深,上官伟,王剑.车联网中驾驶员反应时间实时估计方法[J].交通运输系统工程与信息,2016,16(5):71-78.
作者姓名:柴琳果  蔡伯根  王化深  上官伟  王剑
作者单位:北京交通大学a. 电子信息工程学院;b. 轨道交通控制与安全国家重点实验室,北京100044
基金项目:中央高校基本科研业务费/ Fundamental Research Funds for the Central Universities (2016YJS035);国家自然科学 基金/ National Natural Science Foundation of China(61273089);北京市科技新星计划/ Beijing Science and Technology Star Plan (XX2014B038).
摘    要:结合车辆非线性分段制动特性和车辆状态数据对驾驶员反应时间进行实时估 计,采用特征数据拟合出初速度与减速度上升时间关系模型,通过BP神经网络推算减速 度上升过程中减速度随时间非线性变化关键参数,并在此基础上基于车辆动力学运动规 律求解车辆分段制动位移,通过实际位移与理论位移等价关系实现驾驶员反应时间实时 估计,最后利用Newell 跟驰模型场景对本文提出方法进行仿真验证.结果表明:不同初速 度条件下,反应时间估计值平均误差不超过0.022 s;不同反应时间条件下,反应时间估计 值平均误差不超过0.013 s.本文提出的反应时间估计方法不用增加通信负担和额外设备, 能够达到较高精度,具备更优的适应性、可用性及工程价值.

关 键 词:交通工程  反应时间估计  制动特性  车联网  仿真验证  
收稿时间:2015-11-18

Real-time Estimating Method of Diver’s Reacting Time under the Condition of Internet of Vehicles
CHAI Lin-Guo,CAI Bai-gen,WANG Hua-shen,SHANGGUANWei,WANG Jian.Real-time Estimating Method of Diver’s Reacting Time under the Condition of Internet of Vehicles[J].Transportation Systems Engineering and Information,2016,16(5):71-78.
Authors:CHAI Lin-Guo  CAI Bai-gen  WANG Hua-shen  SHANGGUANWei  WANG Jian
Institution:a. School of Electronic and Information Engineering; b. State Key Laboratory of Rail Traffic Control and Safety, Beijing Jiaotong University, Beijing 100044, China
Abstract:A driver reacting time real- time estimating method based on nonlinear piecewise braking features and vehicle status is proposed in this paper. Numerical fitting approach is used to illuminate the relationship of initial velocity and deceleration rising time. And a BP neural network is established to model the main parameters of the a- t curve. Based on the two vehicle dynamic models, it estimates the driver reacting time through comparison of the theoretical displacement and the actual displacement. It sets up a Newell car following model based simulating environment to verify the methodology. The results show that under the condition of different initial velocity, the error of estimated reacting time is less than 0.022 s. And under the condition of different reacting time, the error of estimated reacting time is less than 0.013 s. The method proposed in the paper doesn’t need extra information interaction and measurement devices. And the precision can meet the requirement of vehicle safety. It can be used in traffic engineering.
Keywords:traffic engineering  reacting time evaluation  braking features  internet of vehicles  simulation and verification  
点击此处可从《交通运输系统工程与信息》浏览原始摘要信息
点击此处可从《交通运输系统工程与信息》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号