首页 | 本学科首页   官方微博 | 高级检索  
     检索      

1.4003铁素体不锈钢焊接接头的组织和力学性能
引用本文:赵雯雯,许鸿吉,谢明,焦健强.1.4003铁素体不锈钢焊接接头的组织和力学性能[J].大连铁道学院学报,2009(6):35-38.
作者姓名:赵雯雯  许鸿吉  谢明  焦健强
作者单位:大连交通大学材料科学与工程学院;
摘    要:通过室温拉伸、室温弯曲、冲击、维氏硬度等试验以及金相分析对1.4003铁素体不锈钢焊接接头的显微组织和力学性能进行了研究.试验结果表明:用熔化极混合气体保护焊焊接的1.4003接头,其抗拉强度高于母材,弯曲性能良好,HAZ处冲击功较低且随温度的降低急剧下降.焊缝区的硬度低于母材,熔合线附近硬度值有波动,过热区硬度没有明显下降.焊缝组织是以奥氏体为主的铁素体+奥氏体双相组织,焊接热影响区过热区铁素体晶粒粗大,是导致该部位韧性下降的主要原因.

关 键 词:铁素体不锈钢  组织  力学性能

Microstructure and Mechanical Properties of 1.4003 Ferritic Stainless Steel Welded Joints
ZHAO Wen-wen,XU Hong-ji,XIE Ming,JIAO Jian-qiang.Microstructure and Mechanical Properties of 1.4003 Ferritic Stainless Steel Welded Joints[J].Journal of Dalian Railway Institute,2009(6):35-38.
Authors:ZHAO Wen-wen  XU Hong-ji  XIE Ming  JIAO Jian-qiang
Institution:ZHAO Wen-wen,XU Hong-ji,XIE Ming,JIAO Jian-qiang(School of Material Science , Engineering,Dalian Jiaotong university,Dalian 116028,China)
Abstract:Microstructures and properties of 1.4003 ferritic stainless steel welded joints are investigated by room-temperature tensile test,impact test,Vickers hardness test and metallographic analyse.The results show that the joints by means of MAG has good tensile strength which is higher than base metal and good bend properties.HAZ on 1.4003 side has bad impact properties which will be sharply reduced with the temperature dropped.Near Fusion line the hardness has fluctuation.Hardness of overheating area is not dec...
Keywords:ferritic stainless steel  microstructures  properties  
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号