首页 | 本学科首页   官方微博 | 高级检索  
     检索      

耦合损伤时相关疲劳失效模型的有限元实现
引用本文:罗艳,高庆.耦合损伤时相关疲劳失效模型的有限元实现[J].西南交通大学学报,2012,47(2):230-235.
作者姓名:罗艳  高庆
作者单位:1. 成都理工大学地质灾害防治与地质环境保护国家重点实验室,四川成都,610059
2. 西南交通大学力学与工程学院,四川成都,610031
基金项目:国家自然科学基金资助项目,地质灾害防治与地质环境保护国家重点实验室自主研究课题,成都理工大学高层次人材科研启动基金资助
摘    要:为了将耦合损伤时相关疲劳失效模型移植到有限元软件ABAQUS中,使其能够对钎料合金简单结构试样的非比例多轴低周疲劳失效行为进行有限元模拟,通过ABAQUS提供的材料子程序UMAT对其进行了有限元实现,并通过典型算例对简单结构试样在非比例加载路径下的低周疲劳失效行为进行了有限元数值模拟.与相同加载路径下的实验结果比较表明:移植的模型能够较好地模拟钎料结构试样的载荷响应及载荷随循环周次的衰减,同时也能较好地预测其低周疲劳寿命,说明该疲劳失效模型的有限元移植是合理有效的.

关 键 词:有限元实现  损伤  时相关变形  疲劳失效模型

Finite Element Implementation of Damage-Coupled Time-Dependent Fatigue Failure Model
LUO Yan , GAO Qing.Finite Element Implementation of Damage-Coupled Time-Dependent Fatigue Failure Model[J].Journal of Southwest Jiaotong University,2012,47(2):230-235.
Authors:LUO Yan  GAO Qing
Institution:1.State Key Laboratory of Geohazard Prevention and Geoenvironment Protection,Chengdu Univeraity of Technology,Chengdu 610059,China;2.School of Mechanics & Engineering,Southwest Jiaotong University,Chengdu 610031,China)
Abstract:A damaged-coupled time-dependent fatigue failure model was implemented into the finite element code ABAQUS via user material subroutine UMAT,and typical numerical examples were used to simulate the low cycle fatigue(LCF) failure behavior of 63Sn-37Pb solder alloy structural specimen under nonproportional loading paths.The comparison with the experimental results under the same loading paths shows that the implemented constitutive model can simulate the load response and the load decaying with cyclic number,and predict LCF life of the solder structural specimen well.Therefore,the finite element implementation of fatigue failure model is reasonable and effective.
Keywords:finite element implementation  damage  time-dependent deformation  fatigue failure model
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号