Centrifuge performance of LCSM wall reinforced pile-supported wharf subjected to yard load-induced marine slope soil movement

Lattice cement soil mixing (LCSM) walls are constructed to relief the marine slope soil movement that will trigger failure of the pile-supported wharf, the structural performance and pile-soil interactions after the LCSM implementation are major concerns. This paper investigated motion modes, load-displacement relations, soil and pore pressures, and bending moments of pile-supported wharfs with LCSM walls subjected to yard load-induced slope soil movement via centrifuge modeling. Results showed that the LCSM wall tilted to compress the soil and pile, inducing the tilting of the wharf. The lateral structural displacement was effectively restricted by the LCSM wall compared with that of a nonreinforced wharf, but the LCSM wall was not superior to the other lattice wall type with legs in limiting the lateral structural displacement, and the deep LCSM wall worked better at larger soil movement. The rear piles were evidently affected by slope soil movement and were compressed in the middle part. Soil pressures generally increased with increasing yard loads, whereas their distributions were deeply affected by different LCSM wall depths. Pore pressures were greater around the tilting LCSM wall because of larger soil shear areas but dissipated when soil movement stopped. Bending moment distributions indicated evident waterside curvatures in rear piles, whereas waterside curvatures occurred in the upper part and landside curvatures occurred in the lower part in front and middle piles, the effects of LCSM wall types and depth on bending moment distributions were tremendous.