| 基于Q参数化控制器的无刷直流电机调速系统 |
| |
| 引用本文： | 刘思华,邓福军.基于Q参数化控制器的无刷直流电机调速系统[J].大连交通大学学报,2007,28(1):58-61. |
| |
| 作者姓名： | 刘思华 邓福军 |
| |
| 作者单位： | 大连交通大学,电气信息学院,辽宁,大连,116028 |
| |
| 摘 要： | 提出了一种新的电机调速方法,并将其应用到无刷直流电机的驱动控制中.该驱动系统的所有稳定控制器均可用一个独立的Q参数来描述,由该控制器构成的速度环不仅能消除电机脉动转矩引起的速度波动,同时对其他形式的速度干扰也能进行很好的抑制.仿真结果表明:在系统参数发生变化及存在噪声的情况下,在参考速度和负载转矩发生改变时,本文提出的控制策略都能获得鲁棒稳定性和良好的动态性能.
|
| 关 键 词： | 无刷直流电机 调速 Q参数化 |
| 文章编号： | 1673-9590（2007）01-0058-04 |
| 收稿时间： | 2006-10-10 |
| 修稿时间： | 2006年10月10 |
Speed Regulation Systems of BLDCM Based on Q-Parameterization Controller |
| |
| LIU Si-hua,DENG Fu-jun.Speed Regulation Systems of BLDCM Based on Q-Parameterization Controller[J].Journal of Dalian Jiaotong University,2007,28(1):58-61. |
| |
| Authors: | LIU Si-hua DENG Fu-jun |
| |
| Institution: | School of Electronics and Information Engineering, Dalian Jiaotong University, Dalian 116028, China |
| |
| Abstract: | A novel speed regulation method is presented and applied in the drive control of BLDCM. The set of all stabilizing controllers for the drive system is characterized by a free Q parameter. The speed loop acts to attenuate any speed variations caused by the motor pulsating torque in the same way it responds to reject any other sources of speed disturbance. Simulation results show that both robust stability and good dynamic performance of the control system due to noise, variation of system parameters and the step change of speed - command/load torque can be achieved using the proposed controller. |
| |
| Keywords: | brushless DC motor pulsating torque Q-parameterization |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
