| 规范参数对AZ31B镁合金点焊接头组织和性能的影响 |
| |
| 引用本文： | 赵洪运,裘坤,杨德惠,王立夫,沈启明,程艳艳.规范参数对AZ31B镁合金点焊接头组织和性能的影响[J].汽车工艺与材料,2005(9):12-15. |
| |
| 作者姓名： | 赵洪运 裘坤 杨德惠 王立夫 沈启明 程艳艳 |
| |
| 作者单位： | 长春工业大学,材料科学与工程学院,吉林,长春,130012 |
| |
| 摘 要： | 对AZ31B镁合金进行点焊工艺试验，并对不同工艺条件下获得的点焊接头进行了组织性能分析，在此基础上分析规范参数对镁合金点焊质量的影响规律，并确定出适合AZ31B镁合金点焊的工艺规范。试验结果表明：当焊接工艺参数为P=1500N，I=18000A，T=5周波时获得的焊接接头的金相组织为仅一侧有少量柱状晶其他是特细的等轴晶，且剪切力可达到1980N；本试验条件下，镁合金点焊接头拉剪断口宏观上为脆性断裂特征，在微观上为解理裂纹。
|
| 关 键 词： | 镁合金 点焊 规范 参数 |
| 文章编号： | 1003-8817(2005)09-0012-03 |
| 收稿时间： | 2005-04-26 |
| 修稿时间： | 2005年4月26日 |
Effect of Regular Parameters on Microstructure and Properties of SpotWelding Joints of AZ31B Magnesium Alloy |
| |
| ZHAO Hong-yun,QlU Kun,YANG De-hui,WANG Li-fu,SHEN Qi-ming,CHENG Yan-yan.Effect of Regular Parameters on Microstructure and Properties of SpotWelding Joints of AZ31B Magnesium Alloy[J].Automobile Technology & Material,2005(9):12-15. |
| |
| Authors: | ZHAO Hong-yun QlU Kun YANG De-hui WANG Li-fu SHEN Qi-ming CHENG Yan-yan |
| |
| Abstract: | Spot-welding process experiment was conducted for AZ31B magnesium alloy, the structures and properties of spot-welding joints in different process conditions were analysed. The effect rules of regular parameters on spotwelding quality of the magnesium alloy were analysed and the right technology processes for AZ31B magnesium alloy spot-welding were given. Experimental results show that,when the welding parameters P=1500 N, I=18000 A, T=5, a little amount of fine equiax columnar grains and others are the very fine equiaxial grains in metallograph in one side of welding joint were found and the shearing force of 1980 N was obtained where macroscopic brittle fracture and microscopic cleavage fraeture were observed. |
| |
| Keywords: | magnesium alloy spot-welding regular parameters |
| 本文献已被 维普 万方数据 等数据库收录！ |
