首页 | 本学科首页   官方微博 | 高级检索  
     检索      

再生工艺对热再生沥青混合料低温抗裂性能的影响
引用本文:侯睿,黄晓明,李海军.再生工艺对热再生沥青混合料低温抗裂性能的影响[J].公路交通科技,2007,24(3):10-14.
作者姓名:侯睿  黄晓明  李海军
作者单位:东南大学,交通学院,江苏,南京,210096
基金项目:国家863计划资助项目(2002AA335100)
摘    要:通过劈裂试验对热再生沥青混合料的低温性能进行了室内试验研究,分析了不同的再生工艺条件(旧料掺加比例、旧料是否预热、新旧料拌和时间以及再生剂掺加工艺等)下的劈裂强度、破坏拉伸应变、劲度模量和应变能密度等相应指标。试验结果表明,增加新料的掺加比例、充分预热旧料、增加新旧料拌和时间将有助于提高再生混合料低温抗裂性能;改进常用的再生剂掺加工艺同样可以保证低温性能。

关 键 词:道路工程  热再生沥青混合料  再生工艺  低温抗裂性能
文章编号:1002-0268(2007)03-0010-05
修稿时间:2005-10-17

Influence of Recycling Technology on Hot-recycled Asphalt Mixture's Low Temperature Anti-cracking Performance
HOU Rui,HUANG Xiao-ming,LI Hai-jun.Influence of Recycling Technology on Hot-recycled Asphalt Mixture''''s Low Temperature Anti-cracking Performance[J].Journal of Highway and Transportation Research and Development,2007,24(3):10-14.
Authors:HOU Rui  HUANG Xiao-ming  LI Hai-jun
Institution:Transportation College, Southeast University, Jiangsu Nanjing 210096, China
Abstract:Low temperature anti-cracking performance of hot-recycled asphalt mixture is studied,and the influence of different recycling technologies are analyzed(including the proportion,pre-heating in the(mixing) prcessing,the time of mixing,and rejuvenating-agent mix-(technology) for the recycled materials) on the relative index,including cleavage strength,tensional strain,stiffness modulus,and strain energy density.The experiment results indicate that increasing the proportion of new mixture,sufficient pre-heating the recycled(materials) and increasing the time of mixing will enhance low temperature anti-cracking performance.And changing the rejuvenating-agent mix-technology can also guarantee recycled-mixture low temperature performance.
Keywords:road engineering  hot-recycled asphalt mixture  recycling-technology  low temperature anti-cracking performance
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号