首页 | 本学科首页   官方微博 | 高级检索  
     检索      

改性工艺参数对SBS改性沥青性能影响研究
引用本文:郝培文,张宜洛,江建坤,许永明.改性工艺参数对SBS改性沥青性能影响研究[J].重庆交通大学学报(自然科学版),2001,20(2):50-53.
作者姓名:郝培文  张宜洛  江建坤  许永明
作者单位:西安公路交通大学公路工程学院,
摘    要:通过对SBS改性沥青的研究 ,分析了搅拌时间和温度变化对改性沥青性能的影响 ,结果表明 :在综合考虑感温性、高温稳定性及低温抗裂性等指标时 ,搅拌温度在 180℃条件下 ,日本沥青、胜利沥青及兰炼沥青用SBS进行改性时其合理的搅拌时间分别为 2h ,3h和 4h ;随着搅拌温度的升高 ,改性沥青的感温性降低、软化点、低温延度增加 ;说明适当增加搅拌温度有利于聚合物与沥青的相容

关 键 词:搅拌时间  搅拌温度  改性沥青  力学性能
文章编号:1001-716X(2001)02-0050-04
修稿时间:2000年6月23日

Study on industrial Parameter of SBS polymer-modified asphalt
HAO Pei-wen,ZHANG Yi-luo,JIANG Jian-kong,XU Yong-ming.Study on industrial Parameter of SBS polymer-modified asphalt[J].Journal of Chongqing Jiaotong University,2001,20(2):50-53.
Authors:HAO Pei-wen  ZHANG Yi-luo  JIANG Jian-kong  XU Yong-ming
Abstract:The paper studied SBS polymer modified asphalt. It analysed effect of blend time and temperature on SBS polymer modified asphalt properties, and the results show the effective blend time for Japanese asphalt, SLi asphalt and LAL asphalt modified with SBS polymer are espectively 3 hours, 3 hours and 4 hours, based on temperature susceptibility、 high temperature stability and low temperature stability of asphalt. With the increase of the blend temperature, the temperature susceptibility of SBS polymer modified asphalt is decreased, the soft point and ductility at low temperature are increased, and it shows that increasing of blend temperature is beneficial to compatibility between SBS polymer and asphalt.
Keywords:blend time  blend temperature  modified asphalt  performance
本文献已被 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号