| 闭孔泡沫铝与铝及铝合金覆板的冶金结合 |
| |
| 引用本文： | 王德庆,于青泉,钟功诚.闭孔泡沫铝与铝及铝合金覆板的冶金结合[J].大连铁道学院学报,2010(3):52-57. |
| |
| 作者姓名： | 王德庆 于青泉 钟功诚 |
| |
| 作者单位： | 大连交通大学材料科学与工程学院;大连盛辉钛业有限公司; |
| |
| 基金项目： | 辽宁省教育厅高等学校科学技术研究资助项目(20060094) |
| |
| 摘 要： | 利用直接冶金结合方法,研究了铝及铝合金覆板的厚度及复合温度与时间对闭孔泡沫铝夹心三明治与覆板结合层厚度的影响.利用金相显微镜观察了泡沫铝夹心与覆板结合界面的微观组织,并测量了结合界面的扩散层厚度和显微硬度.研究结果表明,铝熔体与纯铝和铝合金覆板复合温度越高,复合时间越长,他们之间的扩散层厚度越大;当纯铝板的预热温度为400~450℃,复合速度为53.9~74.4 mm/min时,泡沫铝夹芯与纯铝板形成良好冶金结合,复合界面的互扩散层厚度为39~44μm;当铝合金覆板的预热温度为240℃,复合速度为58.3 mm/min时,制备铝合金覆板泡沫铝三明治所需的铝合金板最小厚度应为7.9 mm.
|
| 关 键 词： | 泡沫铝三明治 冶金结合 界面 显微硬度 |
Metallurgy Bonding of Closed-Cell Aluminum Foam with Aluminum and Aluminum Alloy Plate |
| |
| WANG De-qing,YU Qing-quan,ZHONG Gong-chen.Metallurgy Bonding of Closed-Cell Aluminum Foam with Aluminum and Aluminum Alloy Plate[J].Journal of Dalian Railway Institute,2010(3):52-57. |
| |
| Authors: | WANG De-qing YU Qing-quan ZHONG Gong-chen |
| |
| Institution: | WANG De-qing,YU Qing-quan,ZHONG Gong-chen(School of Materials Science , Engineering,Dalian Jiaotong University,Dalian 116028,China) |
| |
| Abstract: | Using direct metallurgy bonding technology,the effect of aluminum and aluminum alloy plate thickness,bonding temperature and time on the diffusion layer thickness between the plates and aluminum foam were studied.The interface microstructures of the aluminum foam sandwich was observed,and the diffusion layer thickness and micro-hardness were measured.Experiment results show that the diffusion layer thickness between aluminum melt and pure aluminum and aluminum alloy plates is increased with increasing bondi... |
| |
| Keywords: | Aluminum foam sandwich metallurgy bonding interface micro-hardness |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
