首页 | 本学科首页   官方微博 | 高级检索  
     检索      

LZ50车轴钢中的混晶组织
引用本文:李辉,秦晓锋,温宝利,刘世程,刘德义.LZ50车轴钢中的混晶组织[J].大连铁道学院学报,2010(3):48-51,96.
作者姓名:李辉  秦晓锋  温宝利  刘世程  刘德义
作者单位:齐齐哈尔轨道交通装备有限责任公司;大连交通大学材料科学与工程学院;
摘    要:对具有不同原始组织的三个炉号的LZ50车轴钢进行了不同工艺的热处理,用金相方法分析了晶粒度的变化规律,比较了钢中微量元素Al、Ti含量与晶粒度的关系,结果表明:具有混晶组织的LZ50车轴钢加热到Ac1~Ac3之间时晶粒细化,但超过Ac3温度后即出现混晶,且不同钢中混晶倾向与原始状态的相同;钢中微量元素Al、Ti含量越高,混晶倾向越严重;高温固溶、低温析出预备热处理可以改变晶粒长大倾向,消除混晶组织.在此基础上对LZ50车轴钢的混晶原因进行了讨论.

关 键 词:LZ50车轴钢  混晶组织  酸溶铝  第二相质点

Mixed Grains in LZ50 Axletree Steel
LI Hui,QIN Xiao-feng,WEN Bao-li,LIU Shi-cheng,LIU De-yi.Mixed Grains in LZ50 Axletree Steel[J].Journal of Dalian Railway Institute,2010(3):48-51,96.
Authors:LI Hui  QIN Xiao-feng  WEN Bao-li  LIU Shi-cheng  LIU De-yi
Institution:LI Hui1,QIN Xiao-feng1,WEN Bao-li1,LIU Shi-cheng2,LIU De-yi2(1.Qiqihar Railway Rolling Stock Co.,Ltd,Qiqihar 161002,China,2.School of Materials Science , Engineering,Dalian Jiaotong University,Dalian 116028,China)
Abstract:Different heat treatments were conducted for three heats of a LZ50 axletree steel with different original microstructures.The grain size evolution after the heat treatments was examined by metallographic method.The relationship of the trace Al and Ti contents to the grain size was compared.The results show that,the mixed grains can be refined when heated between Ac1 to Ac3,and the mixed gains appear when the steel is heated above Ac3.The tendency of the mixed grains in the steels is just the same as in the ...
Keywords:LZ50 axletree steel  mixed grain  acid-soluble Aluminum  second phase particles  
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号