| 三维曲面船体外板成形加工的新方法 |
| |
| 引用本文： | 王呈方,胡勇,李继先,张灿勇,范正勇,马军伟.三维曲面船体外板成形加工的新方法[J].武汉理工大学学报(交通科学与工程版),2010,34(3):431-434. |
| |
| 作者姓名： | 王呈方 胡勇 李继先 张灿勇 范正勇 马军伟 |
| |
| 作者单位： | 1. 武汉理工大学交通学院,武汉,430063
2. 山东硕力机械制造有限公司,泰安,271000 |
| |
| 基金项目： | 国家自然科学基金项目资助 |
| |
| 摘 要： | 国内外船厂通常采用人工操作压力机与水火弯曲相结合的方式进行双曲度船体外板加工,这种方式生产效率低,质量差,环境差,成为造船过程中的瓶颈.文中提出了基于＂方形压头可调活络模具板材曲面成形装置＂的板材成形方法.它通过一组方形压头组成的可调活络模具代替传统的整体模具,实现对板材冲压时压痕及皱折的有效控制.介绍了其组成及工作原理,并通过帆形板、鞍形板成形试验验证了其可行性.
|
| 关 键 词： | 船体外板 成形加工 双曲度 可调活络模具 造船 |
A Novel Forming Method for 3D Ship Hull Forming |
| |
| Wang Chengfang,Hu Yong,Li Jixian,Zhang Canyong,Fang Zhengyong,Ma Junwei.A Novel Forming Method for 3D Ship Hull Forming[J].journal of wuhan university of technology(transportation science&engineering),2010,34(3):431-434. |
| |
| Authors: | Wang Chengfang Hu Yong Li Jixian Zhang Canyong Fang Zhengyong Ma Junwei |
| |
| Abstract: | Different from traditional line-heating forming and rolling forming for ship hull plate in shipyard,a novel forming process for 3D ship hull plate is proposed in the paper.It is multi-point forming mechanism with square press heads,which is reconfigurable die.By adjusting the height of each press head,the upper die and lower die can form.The plate can stamped by the dies.The paper presented the composite and working principle,and experiments for the sail-shaped plate and saddle-shaped plate forming were car... |
| |
| Keywords: | ship hull plate forming doubly curvature reconfigurable die shipbuilding |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
