| 不同接触摩擦系数下热压缩形变不均匀性的有限元模拟研究 |
| |
| 引用本文： | 孔晓丽,王欢,侯淑芳.不同接触摩擦系数下热压缩形变不均匀性的有限元模拟研究[J].浙江交通职业技术学院学报,2014(1):52-55. |
| |
| 作者姓名： | 孔晓丽 王欢 侯淑芳 |
| |
| 作者单位： | 南通航运职业技术学院轮机工程系,江苏南通226010 |
| |
| 摘 要： | 利用DEFORM-3D对一种油井管用钢在试样两端接触摩擦系数为0.1、0.2、0.3、0.4、0.5条件下1000℃以0.1s-1进行50%热压缩变形过程进行了有限元模拟,并对试样1/2、1/4 YZ剖面Y、Z方向应变场分布进行分析。结果表明,随接触摩擦系数的增大,鼓肚现象增强,形变不均匀性增大;不同剖面及方向条件下形变不均匀性差异显著,1/2 YZ剖面Z方向形变不均匀性最大,1/4 YZ剖面Y方向形变不均匀性最小。
|
| 关 键 词： | 热压缩 形变不均匀性 有限元 |
Analysis of Deformation Non-Uniformity at Different Contact Friction Factors during Hot Compression by FEM |
| |
| KONG Xiao-li,WANG Huan,HOU Shu-fang.Analysis of Deformation Non-Uniformity at Different Contact Friction Factors during Hot Compression by FEM[J].Journal of Zhejiang Vocational and Technical Institute of Transportation,2014(1):52-55. |
| |
| Authors: | KONG Xiao-li WANG Huan HOU Shu-fang |
| |
| Institution: | (Dept. of Marine Engineering, Nantong Shipping College, Nantong 226010, China) |
| |
| Abstract: | With the help of DEFORM- 3D,the hot compression of an oil casing steel at the contact friction factors of 0. 1、0. 2、0. 3、0. 4、0. 5 was simulated with finite element method. The hot compression was carried out on 1000℃ at a strain rate of 0. 1s- 1. The strain distribution of samples at 1 /2 and 1 /4 YZ section and Y and Z direction was analyzed. The result shows that with the contact friction factor increased,the bulging and deformation non- uniformity are increased; the differences of nonuniformity among different section and direction are remarkable,and the nonuniformity of 1 /2 YZ section and Z direction is the maximum while that of 1 /4 YZ section and Y direction is the minimum. |
| |
| Keywords: | hot compression deformation non-uniformity FEM |
| 本文献已被 CNKI 维普 等数据库收录！ |
