|
|||||
|
|
| 空气弹簧试验台的设计及特性试验 | |
| 引用本文： | 鲍健铭,王保华,杨启梁.空气弹簧试验台的设计及特性试验[J].湖北汽车工业学院学报,2011,25(4):47-51. |
| 作者姓名： | 鲍健铭 王保华 杨启梁 |
| 作者单位： | 1. 武汉科技大学汽车与交通工程学院,湖北武汉430081;湖北汽车工业学院汽车工程系,湖北十堰442002 2. 湖北汽车工业学院汽车工程系,湖北十堰,442002 3. 武汉科技大学汽车与交通工程学院,湖北武汉,430081 |
| 基金项目： | 湖北省教育厅科学技术研究项目 |
| 摘 要： | 利用CATIA建模以及有限元分析设计了一款1/4车辆模型的电控空气悬架试验台,该台架不仅适用于测试气囊特性曲线,还可以模拟由静态载荷、动态载荷以及交变载荷变化引起气囊高度的改变,从而观察系统为保持车辆高度不变所做出的反应,最后通过空气弹簧特性试验,验证了该台架符合设计需求,为下一步开发空气悬架控制策略提供了平台。 |
| 关 键 词： | 空气悬架 CATIA建模 有限元分析 空气弹簧特性曲线 |
Design and Characteristic Test of Air Spring Test Bench |
|
| Bao Jianminng,Wang Baohua,Yang Qiliang.Design and Characteristic Test of Air Spring Test Bench[J].Journal of Hubei Automotive Industries Institute,2011,25(4):47-51. | |
| Authors: | Bao Jianminng Wang Baohua Yang Qiliang |
| Institution: | 1(1.School of Automobile and Traffic Engineering,Wuhan University of Science and Technology,Wuhan 430081,China;2.Dept.of Automotive Engineering,Hubei Automotive Industries Institute,Shiyan 44002,China) |
| Abstract: | A 1/4 vehicle model’s test bench of electronically controlled air suspension is designed by CATIA modeling and finite element analysis,which can not only measure the air bag characteristic curve,but also simulate the change of air bag’s height caused by the static load,dynamic load and the alternating load so as to observe the system’s response to keep the constant vehicle height.The characteristic test of the air spring shows that this test bench meets the design requirements and provides a platform for the development of air suspension control strategy. |
| Keywords: | air suspension CATIA modeling finite element analysis air spring characteristic curve |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |