| 重载货车摩擦缓冲器阻抗特性的数值模拟 |
| |
| 引用本文： | 杨亮亮,罗世辉,马卫华,傅茂海.重载货车摩擦缓冲器阻抗特性的数值模拟[J].铁道学报,2020(1):46-51. |
| |
| 作者姓名： | 杨亮亮 罗世辉 马卫华 傅茂海 |
| |
| 作者单位： | 南京工程学院汽车与轨道交通学院;西南交通大学牵引动力国家重点实验室;西南交通大学机械工程学院 |
| |
| 基金项目： | 国家自然科学基金(61703200);南京工程学院2019年校级科研基金(YKJ201931) |
| |
| 摘 要： | 为预测摩擦缓冲器的实际工作状态,从几何特征和作用原理的角度,建立详细的MT-2型缓冲器理论模型。首先,通过对缓冲器内部各摩擦元件的运动学和静力学分析,推导出缓冲器在准静态下的阻抗特性;其次,引入附加摩擦系数量化各摩擦元件之间动静态摩擦过渡时的黏滞补偿,并模拟出缓冲器在动态下的阻抗特性;最后,利用C80型货车冲击试验数据对该缓冲器的理论模型进行验证。验证结果表明:总体上,数值模拟和现场试验下的缓冲器示功曲线基本吻合,说明模型的正确性;局部上数值模拟中缓冲器从加载Ⅰ阶段过渡至加载Ⅱ阶段的突变现象在冲击试验中表现的并不明显,还有待进一步完善。
|
| 关 键 词： | 重载货车 摩擦缓冲器 阻抗特性 准静态 动态 |
Numerical Simulation on Resistance Characteristics of Friction Draft Gear for Heavy Haul Freight Car |
| |
| YANG Liangliang,LUO Shihui,MA Weihua,FU Maohai.Numerical Simulation on Resistance Characteristics of Friction Draft Gear for Heavy Haul Freight Car[J].Journal of the China railway Society,2020(1):46-51. |
| |
| Authors: | YANG Liangliang LUO Shihui MA Weihua FU Maohai |
| |
| Institution: | (School of Automotive and Rail Transit,Nanjing Institute of Technology,Nanjing 211167,China;State Key Laboratory of Traction Power,Southwest Jiaotong University,Chengdu 610031,China;School of Mechanical Engineering,Southwest Jiaotong University,Chengdu 610031,China) |
| |
| Abstract: | In order to predict actual working states of friction draft gears,a detailed theoretical model of MT-2 draft gear was developed.The modelling was improved with geometric feature and working mechanism considered.First,the friction elements inside a friction draft gear were analyzed by kinematics and statics to obtain quasi-static resistance characteristics of the friction draft gear.Then an additional friction coefficient was introduced to quantify the viscous compensation between the friction elements during the dynamic and static friction transition,and to simulate the resistance characteristics of the friction draft gear under dynamic conditions.To demonstrate the accuracy of the model,a comparison of numerical simulation and field test in vehicle shunting operation was done.The comparison results indicate that the working curves of the draft gears in the simulation show good agreements with test results,indicating the correctness of the model.The sudden change from loading StageⅠto loading StageⅡoccurring in the simulation is not obvious in the test.The model needs to be further improved. |
| |
| Keywords: | heavy haul freight car friction draft gear resistance characteristic quasi-static dynamic |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
