| 装配式输油管线的抗碾压能力分析 |
| |
| 引用本文： | 宋花平,张娅,孙鹏,夏宁.装配式输油管线的抗碾压能力分析[J].管道技术与设备,2010(5):1-3,9. |
| |
| 作者姓名： | 宋花平 张娅 孙鹏 夏宁 |
| |
| 作者单位： | 1. 中国人民解放军总后勤部油料研究所,北京,102300
2. 北京化工大学机电工程学院,北京,100029 |
| |
| 摘 要： | 敷设在地面的输油管线可能受到行进车辆的碾压和其他物体的碰撞冲击,使管线破坏而失去使用功能。因此,研究管道在静、动载荷下的强度有着重要的实际意义。采用ANSYS及LS-DYNA软件对装配式输油管线建立了有限元模型,进行了静、动态弹塑性有限元数值计算,得到了其可承受的最大载荷和相应的变形。计算结果表明：过载碾压会使管子产生局部的凹陷;管线的承载能力随管子的壁厚增加而提高;管子在高速冲击碾压下会产生较大的变形,冲击的动变形大于静载下的变形,而震荡的动应力小于稳定静载下的静应力。
|
| 关 键 词： | 装配式输油管线 有限元分析 承载能力 |
Analysis of Assembly Oil Pipeline Subject to Roll and Impact Load |
| |
| SONG Hua-ping,ZHANG Ya,SUN Peng,XIA Ning.Analysis of Assembly Oil Pipeline Subject to Roll and Impact Load[J].Pipeline Technique and Equipment,2010(5):1-3,9. |
| |
| Authors: | SONG Hua-ping ZHANG Ya SUN Peng XIA Ning |
| |
| Institution: | SONG Hua-ping1,ZHANG Ya2,SUN Peng2,XIA Ning2(1.POL Research Institute of General Logistics Department of PLA,Beijing 102300,China,2.College of Mechanical Engineering,Beijing Univ.of Chemical Technology,Beijing 100029,China) |
| |
| Abstract: | Oil pipelines laying on the ground can be rolled by vehicles and impacted by other objects.Consequently these impacts may cause oil pipelines to fail and lose their functions.So,it is significant to study strength of pipes under static and dynamic loads.FEM model of pipelines is built,numerical calculations are made by use of ANSYS & LS-DYNA;the maximum load that pipelines can withstand is determined;and the corresponding deformation is obtained.Results show that bearing capability of pipelines increase as ... |
| |
| Keywords: | coupled petroleum pipeline FEA bearing capability |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
