首页 | 本学科首页   官方微博 | 高级检索  
     检索      

利用试验模态参数建立轮胎非稳态侧偏模型
引用本文:尚进,管迪华,任礼行.利用试验模态参数建立轮胎非稳态侧偏模型[J].汽车工程,2000,22(3):145-149.
作者姓名:尚进  管迪华  任礼行
作者单位:1. 清华大学,汽车安全与节能国家重点实验室
2. 香港理工大学
基金项目:吉林工业大学汽车动态模拟国家重点实验室开放基金资助。
摘    要:在对轮胎垂直特性和稳态侧偏特性建模的基础上,利用由轮胎模态试验提取的试验模态参数建立了轮胎非稳态侧偏模型,该模型考虑了印迹的动态变形和胎宽的影响,对印迹进行离散化并初步计入了速度对非稳态性的影响,推导出侧向力和回正力矩关于侧向位移和摆动角的传递函数的解析公式,可以计算不同载荷下的非稳态特性,计算结果与文献中的试验结果相符,建模和计算结果说明利用试验模态参数可以方便地建立轮胎的非稳态特性,计算结果与

关 键 词:试验模态参数  非稳态  侧偏模型  轮胎

Modeling of Non-steady State Tire Cornering Properties by Experimental Modal Parameters
Shang Jin,Guan Dihua,Yam L.H.Modeling of Non-steady State Tire Cornering Properties by Experimental Modal Parameters[J].Automotive Engineering,2000,22(3):145-149.
Authors:Shang Jin  Guan Dihua  Yam LH
Institution:Shang Jin ,Guan Dihua ;(Tsinghua University, State Key Laboratory of Automobile Safety and Energy Conservation);Yam L.H. ;(The Hong Kong Polytechnic University)
Abstract:Based on tire models of vertical and steady state cornering properties, this paper establishes a non-steady state tire cornering model with experimental modal parameters extracted from modal experiments. Considering the effects of dynamic deformation of tire contact patch and the tire width, the analytical formulas for calculating non-steady state properties are derived with contact patch discretized and the effect of velocity considered. The calculated results under different loads tally with that of experiments in cited references. Modeling and calculate results show that using experimental modal parameters can easily establish tire properties models and calculated tire dynamic properties under various conditions.
Keywords:Experimental modal parameters  Non-steady state  Space domain  Yaw angle
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号